i've searched all over the aempower forums and I can't find which wire goes from the f/ic to the uego for logging. i know it is the white wire on the uego but i don't know which one on the f/ic

 

bump for an answer! I would like to know the same thing. Do you know what wire it is on the f/ic... well what the wire is supposed to do? I have a pin out of the f/ic that i can look at?

 

apparently i have found out that if you call aem they will send you are wire that clips into the harness on the f/ic. can someone confirm this?

 

white wire to number 18 pin..

try 18 and 17, mine said it was number 17, but it was actually 18.

 

there is no wire in pin 17 and 18 on my pnp harness

 

you need molex connectors, they send them to you

http://forum.aempower.com/forum/inde...c,20726.0.html

its all in there buddy.

 

ok, great, thanks alot

 

Theres a wire thats not being used on the harness, the 12v switch (unless u used it) - i pulled that wire out and put it in the pin for the UEGO - worked flawlessly (have fun calibrating it - the mauals values are not very accurate)