Whoa 21psi on a 100% stock tC1
#1
Senior Member
Music City Scions
Scikotics
SL Member
Thread Starter
Join Date: Jun 2005
Location: TN
Posts: 16,747
Whoa 21psi on a 100% stock tC1
For example, the 2AZ-FE that is found in the tC 1st gen can hold up to 21lbs/1.5bar of boost pressure safely WITHOUT any internal engine modification. That means NO new pistons, NO new connecting rods, NO new crankshaft, and NO sleeving. Not many manufacturers can make such a claim. Is that "AWESOME" enough for you?
Why wasn't I notified of this...
I responded to inform him and the response:
Talked to Rado at the South beach premier of the xB2 and xD.
He did the development and stated that the connecting rods fail at around 22~23 PSI. Anything under that; the engine holds solid.
If you disagree, then give him a shout and verify; I'm going to go with the guy who has developed a turbo kit for the car and races professionally.
He did the development and stated that the connecting rods fail at around 22~23 PSI. Anything under that; the engine holds solid.
If you disagree, then give him a shout and verify; I'm going to go with the guy who has developed a turbo kit for the car and races professionally.
#2
Lol travis I didn't even wanna get into it with him cuz I was already heated with the clown on the thread from last night but how redic is that lulz 21psi hold on ima go do that right now do 1 pull n toss a rod out the side of the block... ok maybe not 1 pull but point is made this isn't a supra its a tc 16psi I'm pretty sure is max n that's a time bomb itas more of the power issue where u start to bend rods n crack the ring landings on these motors since they sit so high what I do know is 14psi is safe ;-)
Sidekick 4G
Sidekick 4G
#4
If that statement were true then A LOT of people would run 20 psi out the gate rather than the usual 10-14 psi. If memory serves me correct I believe that a few people did try and run 20 psi on a stock block and it lasted a week at most. Like johnnyb305mia said....its a tC not a Supra.
#7
......dafuq is this? 21psi? and chris rado helped develop what? the 2az-fe rods? who the hell would believe that? i mean really chris worked hand in hand with toyota engineers 10 years ago to develop an economy engine for the camry? i cannot face palm enough at this nonsense.
#10
......dafuq is this? 21psi? and chris rado helped develop what? the 2az-fe rods? who the hell would believe that? i mean really chris worked hand in hand with toyota engineers 10 years ago to develop an economy engine for the camry? i cannot face palm enough at this nonsense.
#18
Tell u guys what when my block gets built I will put the stock block on 20psi n will video every race and every pull I do I gaurentee the car doesn't last 3 pulls on full 20psi n I blow 3rd or 4th gear as well anybody willing to agree plz lmk again whe I have the money to just dump that money u know won't be soon but still ill do it for u scion peeps
Sidekick 4G
Sidekick 4G
#19
Tell u guys what when my block gets built I will put the stock block on 20psi n will video every race and every pull I do I gaurentee the car doesn't last 3 pulls on full 20psi n I blow 3rd or 4th gear as well anybody willing to agree plz lmk again whe I have the money to just dump that money u know won't be soon but still ill do it for u scion peeps
Sidekick 4G
Sidekick 4G