hotwheelsrs1

hey guys ill be getting my car dyno tuned here within the next month and i was just kindof wondering what kind of numbers i should expect...

ill be running with:

trd supercharger
nst 9.5 psi pulley
nst lite crank, water pump, and alternator pulleys
turbo xs type 25 bpv
exedy stage 1 organic disc clutch
comp clutch lightweight flywheel
snow performance stage 2 meth injection
megan racing downpipe
megan racing drift spec catback
custom sr intake with aem dry-flow filter
lol i think thats it...

its all going to be tuned on an aem fic...

and how much psi could i run on this setup without needing bigger injectors or fuel system work?

BuddhasTC

probably on a conservative tune...around 250-260. As long as you have the injectors that go with the supercharger...you should be fine. and you'll be running between 8 and 10 psi with the 9.5 psi pulley...there's a lot of variables so an estimate is really pointless until it's done

ahatch133

ill be waiting for results. im agreeing with buddhas

hotwheelsrs1

true, just trying to get an idea since theres so many numbers floating around now...

on the trd injectors whats the max psi u can run before u need to get bigger injectors and all that good stuff lol

draxcaliber

you'll just have to find out by seeing if your start leaning out at higher rpms. ther ewas one guy who was running 10.5 psi on the trd injectors.

youngflyer

o0 i really thought this thread would be a i have an intake and exhaust what kind of whp do you think i have haha!

hotwheelsrs1

Haha naw, but i do love watching those lol

So if anything the highest i can go as is would only be like 1 more psi? Lol guees im good as is cause im not putting any more into this thing haha! Injectors are mucho $ i dont have lol

THansenite

Do you have all that stuff installed on your car now? If so and you are running on the F/IC, I can give you a pretty accurate HP number by looking at a data log.

rosedaleny806

I'm gonna say anywhere between 215-230. jus a guesstimate

streettimetc

I'm going to say 250-260whp becouse my tc put down 217whp and 196wtq with trd s/c, stock pulley, stock trd tune and stock intake just had header full 2.5 exhaust and lite crank pulley. a nst 9.5 psi pulley should put me about the 230whp mark

hotwheelsrs1

No my car is in pieces right now lol, getting some paint an powdercoat done, and waiting for the fic harness and some pieces of my meth kit to come in, and sc key is being made... Lol my stage 2 meth controller was backordered so hopefully next week or the week after ill get to drive it again, its almost been 2 weeks already lol

rhythmnsmoke

That's a low guess. Should be over 230.

CarbonXe

iTrader: (1)

All depends on the dyno. I've seen a 5-Spd S/C with a full exhaust put 190 down and an auto TRD S/C put 156 down.

rosedaleny806

idk i think ill stand by my guesstimate. ill say 235. but ofcourse i could be completely off and wrong. we jus gotta wait and see.

hotwheelsrs1

Lol so 215 - 260 huh? Lol

tri856

im gonna say 268whp. does anybody wanna amke any bets?

CarbonXe

iTrader: (1)

The funny thing about this, is that OP has a stage 1 clutch.

java09

imma say 208whp.. then it will break.

im a realist.

rhythmnsmoke

Of course. I was sticking to dynojet numbers. My boy Rich has a 9 PSI pulley, I/H/E and crank pulley and dynoed 238whp.

CarbonXe

iTrader: (1)

DynoJet ftl. DynoDynamics realistic low readings FTW.