* tC Stock Radio LED Conversion Guide by LEDmod.com
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
* tC Stock Radio LED Conversion/Swap Guide by LEDmod.com
Scion tC Stock Radio LED Conversion/Swap Installation Guide
by LEDmod.com
For all three Generation
** NOTE : This isn't for beginner, so if you aren't sure you can do this then, please seek professional help
We also offer installation for Local and Out of state people
Here is a step by step guide for LED Conversion
Things you'll need (Mostly available at RadioShack)
- Fine point Pencil Soldering Iron (Recommend 15-30 watt)
- Solder : Prefer silver-bearing solder or rosin core solder (Thinner the better, easier to work with)
- Soldering accesories
- Philips screw driver and 10mm socket wrech
- LEDs and Resistor (Available at LEDmod.com)
*Note : Generation number might not be accurate, but they shares similar installation
You are pretty much done
If you aren't sure if you've installed it right, you can just put the radio back on with just the circuit board attached to check them out.
If all the LED lights up, put everything back together
If you have any questions, just E-mail me at Sean@LEDmod.com
by LEDmod.com
For all three Generation
** NOTE : This isn't for beginner, so if you aren't sure you can do this then, please seek professional help
We also offer installation for Local and Out of state people
Here is a step by step guide for LED Conversion
Things you'll need (Mostly available at RadioShack)
- Fine point Pencil Soldering Iron (Recommend 15-30 watt)
- Solder : Prefer silver-bearing solder or rosin core solder (Thinner the better, easier to work with)
- Soldering accesories
- Philips screw driver and 10mm socket wrech
- LEDs and Resistor (Available at LEDmod.com)
*Note : Generation number might not be accurate, but they shares similar installation
You are pretty much done
If you aren't sure if you've installed it right, you can just put the radio back on with just the circuit board attached to check them out.
If all the LED lights up, put everything back together
If you have any questions, just E-mail me at Sean@LEDmod.com
Last edited by LEDmod; Feb 25, 2012 at 04:49 PM.
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Originally Posted by j0hnBlaze
hey sean how much would u charge for doin a led conversion on a infinity g35??
I've seen some of them, but never had the chance to prototype it yet..
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Originally Posted by AGTC85
nice! what part of vegas?? im interested in getting some work done.
PM me your phone number then we can discuss over the work or I can goto you to give you detail estimate and customization..
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Originally Posted by kmx22
dang that is nice! where can i buy me a kit?
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Originally Posted by kxnguyen2007
hey sean I want to swap the whole car to blue LED i saw on the web the pink set for 300 and i see that there installin' in NY or do i have to sent in my parts?
I stay in Flushing, NY, so you can get them installed at that location when I'm there..
Or if you don't want to wait, then you can send out your parts over the mail for installation..
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Originally Posted by kxnguyen2007
that's kool It would be great if you can let me know when you coming.
Your car model, year, auto/manual tranny..
Also your free time and date
Once I know when I'll be traveling I'll give you a call for an appointment.
Thanks.