Hello to all,
I have a viper 5901 going in my 07 Tc. I really want to finish this install and need help placing some wires on the H/3 harness. I have the PKALL Bypass and that seems to be working fine cause my accessories (stereo, lights) were going on like they should when the car is running. Just cant get it to crank over.

➢ Heavy gauge remote start, (H3) 10-pin connector
H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT - ??
H3/2 RED/WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87 - 12v (+)
H3/3 ORANGE (+) ACCESSORY OUTPUT Gray wire on ignition (+)
H3/4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL) - ??
H3/5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE) - ??
H3/6 RED (+) FUSED (30A) IGNITION 1 INPUT - 12v (+)
H3/7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT - ??
H3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX
RELAY - ??
H3/9 RED/BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT - 12v (+)
H3/10 NC (no connection)
NC