This shows a regular AUX jack on the left. and aawitch on the right. WHAT DO THESE DO????


Now heres the info
Port Diam = ~3in (a little less)
Port Length = ~ 6in
Opening of sub hole = 9-3/16" or very close to that
Mouting depth is = (drum roll please) the very least 7-1/4" very deep
And now the Cubic foot volume is ~1.2 cubic feet....



And now for your enjoyment. Pics of my car.




With the new FIG grill

 

beats me, but i sent the pic of your rear license plate to my gf. she's been wanting to get new plates for her 4runner, and yours had me rolling.

 

I love you. For this information Mouting depth is 7-1/4"

 

But in your previous post, after I explained how to determine the volume, you stated it was just 0.75' Did you do something to make it bigger, or somehow measure incorrectly the first time?

 

i didn't say that someone esle did...but i did some calculations. based on polygons. i'll explain it later

 

^ Oh, ok then...I guess someone else must have been using your login, because it sure looks like you said "~.75 cf" on this page.

 

 

sorry guys i just got nin from helping a friend paint his basement. I'll try to get the math on here later tonight or tomrrow. sorry dudes

 

did you try flipping the switch?? maybe on/off switch?

 

ok ive decide by taking the time to map the circuit board that the aux jack on the board is most likely for some sort of remote bass ****..you can see it taps into the brown/blck wires which are the potentiometer for the gain....

and the switch looks to be a phase switch...but i cannot be certain.