well i have an 08 with the curtain airbags so an a-pilliar is out. i have been trying to think of ideas to mount 2-3 gauges. if i go FI, 1will deff be boost, 2nd will be A/F meter, and if theres a decent set up for a 3rd, id have no clue.... maybe EGT so the turbo dont run too hot.

 

you can get an ait e-pod that mounts on the center above the a/c vents, or you can get a single din radio and mount them in the radio cubby. you can mount one in the radio cubby.

lastly, you can mount on on the steering column, right on infront of the speedo. i saw a tc with a boost gauge there, it was right in the center so it only blocked the odometer, and the kph readings, but you could still see the mph numbers on the speedometer.

 

https://www.scionlife.com/forums/viewtopic.php?t=188818

check the F/I forums.

 

cant do a din arrangement with my navi. i was thinkin about a basic pod arrangement down by the shifter above the shifter and beneath the radio. im thinkin 2 pods, boost and a/f, then putting the aem f/i controller behind it all (if theres room, i have no clue how big things are) and stillhave laptop access

 

right now i have my alarm valet button there but the wire got cut and its in opperable so i can move that.... id prob have to cut off the whole back off that partial glove bog thing if i want to fit it in there and that would be tough with my ipod and sirius module for the pioneer

 

i put 2 right under the switches that adjust the side mirrors, mounted them right to that removable cover, got a boost gauge and aem wideband

 

quick question, would you rely on AFR readings from an aem fic hooked into my lappy? i notice when i load the software it gives me all my gauges.

only thing im missing now is the actual aem fic... lol