No passenger window controls from driver side door
Hey Guys
I just installed my Injen CAI and i disconnected the negative battery lead while doing, when i reconnected it i was unable to control the passenger window from the drivers controls. I can roll it up using the passenger control but i dont have the auto up/down function. also the light on the passenger control button keeps blinking. Just wondering if anyone has had this problem or if they know any troubleshooting tips. Thanks
I just installed my Injen CAI and i disconnected the negative battery lead while doing, when i reconnected it i was unable to control the passenger window from the drivers controls. I can roll it up using the passenger control but i dont have the auto up/down function. also the light on the passenger control button keeps blinking. Just wondering if anyone has had this problem or if they know any troubleshooting tips. Thanks
Need to reset it.
Roll it all the way down from the passenger side, then all the way up and hold for a couple seconds...do the same with the drivers side and it'll come back.
It's in the manual too...that's where I learned
Roll it all the way down from the passenger side, then all the way up and hold for a couple seconds...do the same with the drivers side and it'll come back.
It's in the manual too...that's where I learned
I did this when I installed my Sat radio in the tC and it scared the crap outta me, but came back on its own
. Fooling with passenger door wires was a waste of time, except that I learned what wires control locks and windows.
Thread
Thread Starter
Forum
Replies
Last Post
SuperXero
Scion tC 1G ICE & Interior
1
Feb 23, 2020 08:17 AM
mischadoll
Maintenance & Car Care
3
Mar 9, 2015 05:48 AM
CPL_Radar
Scion tC 1G Owners Lounge
5
Mar 5, 2015 05:42 AM
minter66
PPC: Vehicles
0
Dec 15, 2014 01:45 PM
pier0723
Scion tC 1G ICE & Interior
2
Dec 3, 2014 03:38 PM








