Post Pics of Your tC System Here

DSC00991 by jgrycko, on Flickr

DSC00992 by jgrycko, on Flickr

DSC00996 by jgrycko, on Flickr

DSC00993 by jgrycko, on Flickr
Alpine IVAW200, Alipne PXHA701 Processor, Boston Z6 fronts w/ Audison LRX4300 bi amped, JL Audio 10w6 w/ Audison LRX 1400. All JL Audio Wiring. Escort SR1 radar in custom panel with mirror controls reloacted
Here is my 2011 Scion TC ICE
Alpine IVA-W205
- Bluetooth
- Navigation
- Ipod Interface
Alpine MRP-F300
- Powers all 8 stock speakers. I bypassed the factor Scion Amp that powers the 2 subs in the door
Alpine PDX 1.600
- This amp powers my subs. This has to be one of the sickest amps out there. I have it on max gain and the sub level on max and its just pure head ache bass with no distortion at all. Its awesome!!
2 Rockford Fosgate 12inch Punch HX2 Subs
- I've had these subs for a while now and I refuse to give them up. The hit hard and with the solid power coming from the Alpine amp, they are a deadly combination. Both subs are in a ported bass works box. It takes up the entire trunk space.
Anyone who is new to ICE install or needs some info in the 2011 TC ICE install send me a message and I'll help you out.
Alpine IVA-W205
- Bluetooth
- Navigation
- Ipod Interface
Alpine MRP-F300
- Powers all 8 stock speakers. I bypassed the factor Scion Amp that powers the 2 subs in the door
Alpine PDX 1.600
- This amp powers my subs. This has to be one of the sickest amps out there. I have it on max gain and the sub level on max and its just pure head ache bass with no distortion at all. Its awesome!!
2 Rockford Fosgate 12inch Punch HX2 Subs
- I've had these subs for a while now and I refuse to give them up. The hit hard and with the solid power coming from the Alpine amp, they are a deadly combination. Both subs are in a ported bass works box. It takes up the entire trunk space.
Anyone who is new to ICE install or needs some info in the 2011 TC ICE install send me a message and I'll help you out.
used to have a kenstyle kit on my rs 3.0 but swapped it out anyway here is my system:
Kenwood Excelon 6960 dvd/nav HU
Excelon 25th anniv. xxv-04s comp x2
Excelon 25th anniv xxv-03a sub amp
Pioneer Prs-4200 4 channel amp
JL audio 12w6v2 in an ported box(for now)
AudioControl Matrix line converter
Tsunami 12 gauge speaker wire
Tsunami 0 gauge multi amp kit
JL audio rca's (4chx2,1ch x2)
Stinger curcuit breaker
Optima Yellow top battery
Sirius satellite radio
2 bulk packs of dynamat
Kenwood Excelon 6960 dvd/nav HU
Excelon 25th anniv. xxv-04s comp x2
Excelon 25th anniv xxv-03a sub amp
Pioneer Prs-4200 4 channel amp
JL audio 12w6v2 in an ported box(for now)
AudioControl Matrix line converter
Tsunami 12 gauge speaker wire
Tsunami 0 gauge multi amp kit
JL audio rca's (4chx2,1ch x2)
Stinger curcuit breaker
Optima Yellow top battery
Sirius satellite radio
2 bulk packs of dynamat
Last edited by Scion1403; Jul 16, 2011 at 06:33 PM. Reason: adding pic issues

DSC00991 by jgrycko, on Flickr

DSC00992 by jgrycko, on Flickr

DSC00996 by jgrycko, on Flickr

DSC00993 by jgrycko, on Flickr
Alpine IVAW200, Alipne PXHA701 Processor, Boston Z6 fronts w/ Audison LRX4300 bi amped, JL Audio 10w6 w/ Audison LRX 1400. All JL Audio Wiring. Escort SR1 radar in custom panel with mirror controls reloacted
No pics yet but i will soon
My set-up
Kenwood DDX-514 w/navi
Alpine MRP-M500
1-12 Jl w6v2
Tuned Enclosure from Jason @ Audio To Go in Radcliff Ky
Scosche 4ga. Amp Kit
Jl C2-650x Coaxials (Doors)
My set-up
Kenwood DDX-514 w/navi
Alpine MRP-M500
1-12 Jl w6v2
Tuned Enclosure from Jason @ Audio To Go in Radcliff Ky
Scosche 4ga. Amp Kit
Jl C2-650x Coaxials (Doors)
I see alot of avic in here i have the x910bt and when the car is running it stays "system start up. please wait" and its doesn't disappea like normal now. it will do that and then 2min later shut of and reboot, anyone have any experience with this happening?? im updated with the newest firmware too and i hate to send it out to get fixed..
Damn that look real clean

DSC00991 by jgrycko, on Flickr

DSC00992 by jgrycko, on Flickr

DSC00996 by jgrycko, on Flickr

DSC00993 by jgrycko, on Flickr
Alpine IVAW200, Alipne PXHA701 Processor, Boston Z6 fronts w/ Audison LRX4300 bi amped, JL Audio 10w6 w/ Audison LRX 1400. All JL Audio Wiring. Escort SR1 radar in custom panel with mirror controls reloacted

DSC00991 by jgrycko, on Flickr

DSC00992 by jgrycko, on Flickr

DSC00996 by jgrycko, on Flickr

DSC00993 by jgrycko, on Flickr
Alpine IVAW200, Alipne PXHA701 Processor, Boston Z6 fronts w/ Audison LRX4300 bi amped, JL Audio 10w6 w/ Audison LRX 1400. All JL Audio Wiring. Escort SR1 radar in custom panel with mirror controls reloacted
I just successfully installed the new Alpine INA-W910 replacing my old Alpine IVA-W205. The new unit is great, but I have one concern with the bluetooth. The phone part works well, better than the bluetooth adapter I had with the IVA-W205, but it's missing bluetooth audio. I have a new phone (Blackberry Torch 9800). I was wondering if anyone who has this head unit has the same issue or has anyone gotten bluetooth audio working?
ok so here is my setup. 2200 watt Audioque amp pushing 2 12in FI BL, Diamond Audio 500/4 pushing highs. I custom built my box to 6.1 cubic feet before displacement and tuned to about 33hz. I had to take out the spare tire and foam pieces to fit this box. I have 0g wire for sub amp and 4g for high amp. the subs are 1000w RMS and 2000w Peak, im pushing about 1100w to each sub. these subs weigh 45lbs each. box will be carpeted this week. i also had to build a new floor which is not pictured. let me know what yall think.



this pic show the diff between my new and old subs (both are 12in)








this pic show the diff between my new and old subs (both are 12in)












