i dc my battery and noticed that my windows didnt work right...so i took it to the dealers and they said it was just the computer being reset from the battery being disconnected.. will this happen very time i dc the battery and do i need to take it to the dealers to have them reprogram it everytime?

 

yes it will, and no you don't...... i think there is a thread somewhere in here that says how to reprogram your windows......anybody know how to do it?

 

When the battery terminal or fuse is disconnected, the glass position of all door windows have to be reset to the initial positions, one by one, with the power window control switch by following the procedure below:

Reconnect the battery terminal or fuse.


Turn ON the ignition switch.


Lower the window of each door halfway or more with the power window switch.


Then close the window fully with the power window switch.


Do not release the switch for at least 2 seconds after the window is fully closed


****let me know....

 

This information is in your owners manual... reading is fundamental. Now its time to burst into an inspirational song inspired by our favorite reading program "Reading Rainbow"!

"Yoooou can do ANYTHING!.. Just take a look.. its in a book... its READING RAINBOW!"