Indemnity83's Black and Silver Beauty
#1
Indemnity83's Black and Silver Beauty
Yeah, dumb title. But whatever, the important part is that I finally went out and took some decent pictures of the tC. If you want to see all the pictures I've taken, I have a gallery of them here. Otherwise, below are my favorites.
I was going to put the tC logo's on the side in Ed style, but I think I've decided that I really like the completely clean look on the side, but I may still see what one looks like in the lower right corner of the upper grill.
As of now, the tC has the following modifications:
I seem to get the same questions often through PM, so here are some FAQ's
Q: What is and Where did you get your headlights
A: They are the Viniati Projector Head Lights w/ Angel Eyes.
Q: Are your headlights HID
A: The are just halogen H1 lamps, with an adapter to connect to the tC harness.
Q: What is, and Where did you get your grill
A: Its the full GrillCraft set made up of the lower 3-piece set and upper grill (no longer in stock?)
Q: Why do you have the wider wheels in back
A: There is no technical reason for the wider wheels/tires. Its purely for aesthetics.
Q: Do you rub in the back with 245s
A: a 245/30R19 shouldn't rub if you have a wheel with the right offset. Due to my back wheel being so wide (9.5") my offset is a few mm off, and if I take a corner hard when my car is loaded it rubs. However, I've done lots of spirited driving with just me in the car, and it does not rub.
Q: What kind of camera/lens do you have
A: I have a Nikon D50 camera, and two lenses. A 18-55mm f3.5-5.6G ED AF-S DX Zoom Nikkor kit lens and my favorite (that I used for most of these shots) a Nikkor AF 70-300mm lens. As well as some miscellaneous filters, tripods, monopods, etc.
I was going to put the tC logo's on the side in Ed style, but I think I've decided that I really like the completely clean look on the side, but I may still see what one looks like in the lower right corner of the upper grill.
As of now, the tC has the following modifications:
- TWM Short Shifter
- TWM Weighted Sift ****
- Lightened Flywheel
- TRD Lowering Springs
- Rear Sway Bar
- Honda S2000-Like Antenna
- Dr. Isotopes Radiator Air Deflector
- 50% Front Window Tinting, 35% Rear 3 Windows
- GrillCraft 4 piece grill set
- Halo, Projector Headlights
- Speed Star Racing SP1 18x8.5 (front) 18x9.5 (rear)
- BFG KDW2 Tires, 225/40 (front) and 245/40 (rear) (pictures are before tire change)
- M3 Lip Spioler (not in pictures)
I seem to get the same questions often through PM, so here are some FAQ's
Q: What is and Where did you get your headlights
A: They are the Viniati Projector Head Lights w/ Angel Eyes.
Q: Are your headlights HID
A: The are just halogen H1 lamps, with an adapter to connect to the tC harness.
Q: What is, and Where did you get your grill
A: Its the full GrillCraft set made up of the lower 3-piece set and upper grill (no longer in stock?)
Q: Why do you have the wider wheels in back
A: There is no technical reason for the wider wheels/tires. Its purely for aesthetics.
Q: Do you rub in the back with 245s
A: a 245/30R19 shouldn't rub if you have a wheel with the right offset. Due to my back wheel being so wide (9.5") my offset is a few mm off, and if I take a corner hard when my car is loaded it rubs. However, I've done lots of spirited driving with just me in the car, and it does not rub.
Q: What kind of camera/lens do you have
A: I have a Nikon D50 camera, and two lenses. A 18-55mm f3.5-5.6G ED AF-S DX Zoom Nikkor kit lens and my favorite (that I used for most of these shots) a Nikkor AF 70-300mm lens. As well as some miscellaneous filters, tripods, monopods, etc.
#4
I decided to ditch the badging completly. I like the clean look.
The shots are still sorta color, they are just highly desaturated. You can still catch the red in the tails, and the orange in the corner markers. I'll post up some color ones when I get some good ones.
Black just seems to look so much cooler when everything around it was desaturated.
The shots are still sorta color, they are just highly desaturated. You can still catch the red in the tails, and the orange in the corner markers. I'll post up some color ones when I get some good ones.
Black just seems to look so much cooler when everything around it was desaturated.
#11
Pictures! I'll start from the furthest back, my lip spoiler. Bad picture because its with an older camera, and the car is dirty but you get the idea.
Next, some pictures I just dug up from when the two bolts in my exhaust just fell out. Both within the same day. These pictures are exactly what it looked like when I put it up on jack stands. The car was so horribly loud when I drove into the dealership to get new bolts, I set off every car alarm in the line I drove next to.
And now, jump ahead like a year; the tCover automatic radio cover.
. These two pictures were taken with my camera phone when my roommate was playing around, but there the only pictures I've got from the install:
Simple, yet elegant. My Maita Scion license plate frame was badly faded and looked bad, so I replaced it with a silver SCION one
Next, the cleaned up engine bay (pressure washer and simple green), with painted heat shield and valve cover. Again, picture quality sucks because I used my really really old point and shoot Coolpix 2100. I'll pull out the D50 at some point and get better pictures, but I just wanted to get something up for now.
And then just tonight, I finally got Dr. Isotopes [acronym="Valve Cover Trim Plate"]VCTP[/acronym] on (a year after buying it). Sorry for the camera phone pictures.
Next, some pictures I just dug up from when the two bolts in my exhaust just fell out. Both within the same day. These pictures are exactly what it looked like when I put it up on jack stands. The car was so horribly loud when I drove into the dealership to get new bolts, I set off every car alarm in the line I drove next to.
And now, jump ahead like a year; the tCover automatic radio cover.
Simple, yet elegant. My Maita Scion license plate frame was badly faded and looked bad, so I replaced it with a silver SCION one
Next, the cleaned up engine bay (pressure washer and simple green), with painted heat shield and valve cover. Again, picture quality sucks because I used my really really old point and shoot Coolpix 2100. I'll pull out the D50 at some point and get better pictures, but I just wanted to get something up for now.
And then just tonight, I finally got Dr. Isotopes [acronym="Valve Cover Trim Plate"]VCTP[/acronym] on (a year after buying it). Sorry for the camera phone pictures.
Thread
Thread Starter
Forum
Replies
Last Post
killahXB2
Scion xB 2nd-Gen Aero & Exterior
4
03-29-2016 04:22 AM
NewBox06
Scion xA/xB 1st-Gen ICE & Interior
1
02-03-2015 12:36 PM