Alignment Report
#1
Alignment Report
I was wondering if they alignment the tC within specs. it seems like i didn't need an alignment at all. I recently rise my tC back to stock height.
IMG_3401.jpg?t=1293656448
any suggestions? why didn't they set the rear toes to 0 degrees also.
the top are the fronts and bottom half are for the rears.
IMG_3401.jpg?t=1293656448
any suggestions? why didn't they set the rear toes to 0 degrees also.
the top are the fronts and bottom half are for the rears.
#2
I was wondering if they alignment the tC within specs. it seems like i didn't need an alignment at all. I recently rise my tC back to stock height.
any suggestions? why didn't they set the rear toes to 0 degrees also.
the top are the fronts and bottom half are for the rears.
any suggestions? why didn't they set the rear toes to 0 degrees also.
the top are the fronts and bottom half are for the rears.
If you look at the intial toe reading for the fronts, wow you were really out! But that's what I noticed about the tC it can be massively out and still drive straight.
#3
the rear toes should be 0.15 each (0.30 total), the toe in the rear was never zero. The fronts are the position that have 0.0 toe. But in your readings, they never touched/adjusted the right rear, just left it at 0.20, why is that? You might want to ask them why they didn't adjust it, since you paid for it.
If you look at the intial toe reading for the fronts, wow you were really out! But that's what I noticed about the tC it can be massively out and still drive straight.
If you look at the intial toe reading for the fronts, wow you were really out! But that's what I noticed about the tC it can be massively out and still drive straight.
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM
gedster314
Regional - Pacific South
1
02-19-2021 07:51 PM
BlingSlade
Scion xB 1st-Gen Owners Lounge
0
09-05-2015 08:52 AM