Philip-tc

sorry im new to this but i just got my alignment and front camber bolts installed. i was wondering if this is correct or close to spec. Thank you

sciontc_mich

stock nominal (think middle of the alignment range) is about -0.5 to -0.6 degrees for front camber. you're very close there where you are.

is this the "before" the alignment numbers or after they did it?

Philip-tc

After he did it

dropzone

The rear camber should be like half of that, at most. Now if you're running an aggressive wheel setup then it's understandable. The rear camber on my tC is at -1.5, still within spec if I recall. Everything else looks good though.

JBell91

iTrader: (1)

The rear camber can be fixed...that tech is lazy. I have a pretty aggressive drop (I wanna guess 2.5-3") and my rear camber was able to be brought to -1.6.

They can 0 out the front toe as well..again lazy tech.

Philip-tc

alright thanks guys!! i'll make sure my tech doesnt do a lazy job next time!