Can I fit a 19x8.5 et 40?

EDITED

 

I would think a +30 and a 10mm spacer would push them out WAY too far. Especially with an 8" wheel. You'd probably want a +40 or so.

But I don't know jack about wheels.

 

according to an offset calc. the wheels will stick out 1.9 inches over stock. Will a rolled fender be enough or no?

 

That I don't know. I haven't had any experience with rolled fenders so I have no idea how much that would help.

 

edited

 

no way, unless you want the Tonka truck look. 19x8 et30 alone is very aggressive. a 1 inch spacer will chew up your fenders. if you dont lower the car at all, then it could work.

 

dude thats like a 19x8 et+5..... rear would probably be ok but front will be sticking out a ton.

stock is 7 et+ 45 = 43.9 mm out from the hub
yours is 8 et+5 = 96.6 mm out from the hub

difference is 52.7 mm = 2.07 inches from the stock wheel. if you're lowered AT all they wont fit at all. plus what wheels are you really going to considering putting adapters on

 

WRONG

 

They won't fit. +30 is already pushing it for our car. with a 1" wheel adapter (25.4mm) it's gonna be +5mm

edit: Bah Neb, you beat me to it haha

 

already took care of it. thread should be closed

 

bump

 

a lil off topic but dont bigger wheels slow down the acceleration?

 

Yes but im not a racer

 

yes you can

 

If you want to do 19x8.5 40 that ok it will fit. That is what i have in my tC you have to run a 225x35x19 tire this max