hi guys!

i wanna convert to 5x114 bolt pattern. what do u guys think about changing out the HUB and ROTOR. i plan on using the 2nd gen xB HUB and ROTOR. do you think this will work? is it just a plug and play or there has to be more modification?

 

The only car to my knowledge that has been converted is the P-tuning tC. So you may want to try contacting them.

 

If I remember correctly P-Tuning had custom front hubs made that were 5x114 bolt pattern, and I beleive the rears were left at the 5x100 bolt pattern.

 

you could just get adapters, thats what im running on my tC

 

Any particular reason an adapter won't work for what you want?

 

i just wanna see my other options.... and i also dont wanna be limited on the rims i get. cuz i know using an adapter i wont be able to go too deep..

 

im running 18x8.5 +45 with a 20mm 5x100 to 5x114.3 so my new offset is +25 which is flush.....

 

I'm sure he wants concave and that +45 is not concave which is why adapters only do so much. If you want the deep concave look, spacers isn't what you want.

 

yes that is why i dont want to do adapters.. it limits u on what kind of rims to get. especially i wanna go for the hella flush look..