JOEinSD

New wheels? WTF? I thought we talked about this yesterday.. Haha.

purpled_out_tC

watching b/c it's funny to see people who haven't read up.

fujita_TC

?what?

JOEinSD

What are you talking about...?

purpled_out_tC

on the perviuos pages, people ask questions when it's obvious they haven't done their homework or "read up". some of the questions could have satisfied by doing some homework and been answered by a bit of research. so i want to see the questions they ask.

i.e. i'm on trd's, but i want to go with 18x8 +35 with 225 tires, will i rub?? or i want to rock 19x8 +25 will i rub??

not the exact questions but close, some were pure common sense.

tcbabe

iTrader: (1)

so, i'm a complete noob. when it comes to this stuff, i'm going to s-techs soon, so will i have any problems w/ a setup of 17x8.5 et.35?

again, sorry for the noob question, but i just wanna be sure before i buy them!

nebster

what size tires you planning on running?

tcbabe

iTrader: (1)

well i was thinking 225, but idk...what do you suggest so that i won't have to roll fenders or anything?

nebster

you'll have to get a different width or different offset if you don't want to roll the fenders. that width / offset combination will make you have to roll the front

tcbabe

iTrader: (1)

kinda figured...ok, thanks!

satoman44

you might be ok actually. i run a 17x8.5 et32 with a 245 tire and don't have too much problems rubbing unless i hit some deep dip in the road or something. so running a 225 tire should be good. if anything, some negative camber should help.

nebster

what drop are you on?

if you're below trd's you'll rub

satoman44

tein basics lowered to around s-tech height. but they're sprung higher than s-techs. my front camber isn't up to stock spec though. but like i said, i'm running a 245, i don't see how 225 is going to be hard to fit. i actually seem to rub more in the rear even though my rears are partially rolled.

nebster

you're also on a 17" tire which means youre overall diameter is slightly smaller. trust me WITH NO ROLLING you're going to rub.

/done

tcbabe

iTrader: (1)

hey guys, thanks for all the help! i just ended up going w/ a different set that was available in a different size than that...

again, i appreciate your help, cuz i'm clueless when it comes to wheels/rolling, etc. lol i'll be the first to admit it.

JoeSchizo

ok, i'm no guru...and i dont think it was answered...

19x8 +40, rub? Wheel suggestion? (Assume stock suspension.)

Edit: I know you have 19x8 +35, better? the additional +5 wouldn't kill me would it? I like the staggered rear wider rims, btw. Nice.

nebster

you'll be fine

JoeSchizo

thanks.

howiedds

18x8.5 et37 with 225 tires on Tanabe DF210 springs with tokicos...... any rubbage???....couldnt really understand the chart....sorry. ( thats why i ask you instead of assuming...)

rolloutrs1

i know 18x8 et25 wheels for the front will fit but will 18x8 et21 fit for the rear? im thinking of getting 215/35/18 for the wheels. any recommendations on which tires are best in stretching? please let me know. thanks!