2011 speakers
Hi all
Looking to know the speaker depth for the doors.
Its kind a cold out right now to start tearing them off to find out up here in Canada.
What i want to do is put a 8" in the 6x9" location if there is room, for up font bass.
I already have installed a kenwood DNX 9960 and have a PPI Ax606.2 driving the factory speakers and they don't like the PPI power!!
Any help you can give me would be great.
Thanks Tony
Looking to know the speaker depth for the doors.
Its kind a cold out right now to start tearing them off to find out up here in Canada.
What i want to do is put a 8" in the 6x9" location if there is room, for up font bass.
I already have installed a kenwood DNX 9960 and have a PPI Ax606.2 driving the factory speakers and they don't like the PPI power!!
Any help you can give me would be great.
Thanks Tony
Following info is from metraonline.com ... was not aware we hade a subwoofer in the rear... can anyone confirm this info physically, too cold here in Canada to try opening up the door panels right now... maybe in april...
Vehicle Speakers
Location Size Depth
Front 1 6X9 3.6
Front 2 3.5 2.5
Front Tweeters 1 1
Rear 1 6.5 3.7
Subwoofer 1 6.5 3
Vehicle Speakers
Location Size Depth
Front 1 6X9 3.6
Front 2 3.5 2.5
Front Tweeters 1 1
Rear 1 6.5 3.7
Subwoofer 1 6.5 3
Thanks Scion Canada,
What i am looking for is how deep the speaker well is or how deep i can go with the factory door locations.
I am looking at a full sound system for the TC we have and because it's different maybe doing a few IASCA SQ events this year.
Some members have been posting and i thank you all.
What i am looking for is how deep the speaker well is or how deep i can go with the factory door locations.
I am looking at a full sound system for the TC we have and because it's different maybe doing a few IASCA SQ events this year.
Some members have been posting and i thank you all.
Thanks Scion Canada,
What i am looking for is how deep the speaker well is or how deep i can go with the factory door locations.
I am looking at a full sound system for the TC we have and because it's different maybe doing a few IASCA SQ events this year.
Some members have been posting and i thank you all.
What i am looking for is how deep the speaker well is or how deep i can go with the factory door locations.
I am looking at a full sound system for the TC we have and because it's different maybe doing a few IASCA SQ events this year.
Some members have been posting and i thank you all.
Door panels are actually really easy to get off. Three phillips head screws. Pop off the plastic cover behind the door release to find the first one. Pop off the the silver, plastic cover on the door handle (if you look close, there's a hole where you can put a flathead screwdriver in) to find the last two. After that, just pull. Plastic clips come right out.
I turned "on" the subwoofer option on the Apline prem stereo...and was shocked.....suddenly all this bottem-end appeared in my ears. I was confused cause I didn't think it had a subwoofer. So, it must be reproducing it thru the woofer/speakers. Which as of now,.....seems decent to me.....but I'm a metal head. I don't need tons of hiphop thump. I sold my 10" bazooka and used that money for a 64gb flash drive for my music in the car (vs. Ipod).
The subwoofer setting only controls the sub rca preouts for an amp you may add. That's why it's under the 'connection' category in the settings. If you don't have to sub and amp installed and connected to that preout, that feature does nothing.
The factory changes the deck and the speakers stay the same.
the 6x9 is riveted in place .
You can put a 8" in the 6x9 location a 4" in the middle and a average 25mm tweeter up top if you wish to change them out for SQ sound.
Minor trimming of the back of the door panel and new mounts for speakers is needed if you good with wood or steel.
If not a really good 6x9 " high end 4" and good tweeter with the 4 and tweeter running of a passive crossover will improve the sound and would be a straight switch .
the 6x9 is riveted in place .
You can put a 8" in the 6x9 location a 4" in the middle and a average 25mm tweeter up top if you wish to change them out for SQ sound.
Minor trimming of the back of the door panel and new mounts for speakers is needed if you good with wood or steel.
If not a really good 6x9 " high end 4" and good tweeter with the 4 and tweeter running of a passive crossover will improve the sound and would be a straight switch .
Hey guys i'm trying to understand this setup. IS the pioneer deck 8 channel? 6 Channel or 4 channel?.. Like is there a cross over in the door that splits the sound?
I'm trying to see if it makes sense to buy a component set or just pairs of speakers.
Thanks!
I'm trying to see if it makes sense to buy a component set or just pairs of speakers.
Thanks!
Tweeter mounts to the door.
6x9" amp under front seat.
Rear side and door 4" and tweeter off deck power.
The pioneer deck is a 6 channel deck with 4 of them being powered and 2 being RCA outputs.
Hope this helps ???
6x9" amp under front seat.
Rear side and door 4" and tweeter off deck power.
The pioneer deck is a 6 channel deck with 4 of them being powered and 2 being RCA outputs.
Hope this helps ???
Absolutely true. Just to keep it simple though, since you are interested in full-range speaker replacement, the deck has four full-range channels. I'd just buy new speakers and leave the factory crossovers.




