Hey guys im a newbie to these forums, and slightly a newbie to the tc!

I bought a 2011 tc a couple of weeks ago and I am slowly building it. I just got a set of fog lights for it and Im a bit stuck on installing them. I haven't found a sticky or any threads of "how to"

So, is there any that I am missing? or any help I could get? (TRD sparks pdf is a bit confusing to me)

 

Where did you got stuck? Instruction is pretty much straightforward.

 

well for OEM ones its pretty easy.. even do it with out having to take the bumper off. its better to look at the TRD sparks PDF in color so you see what to look for.

 

First of all don't cut or drill anything. All you need is a Phillips screwdriver



A ratchet with a 10mm socket



Now, you can lift up the car a bit to make this easier because you will struggle a lot. On the bottom of each corner of the bumper there is a small bracket that opens and has 2 10mm screws, remove them and then stick your hand through there and push out the stock vents.
the fog lights slide in and are held by 1 screw. your bumper already has the existing screw hole for the fog lights to sit in place.