Fog Lights for my 06 xA?
#1
Fog Lights for my 06 xA?
How much is it to get some Fog Lights on my 06 xA???
_____
_____
Last edited by MR_LUV; 06-23-2020 at 03:59 AM. Reason: Awarded 10 Year Badge
#2
Trdsparks has the OEM ones for $219 + free shipping.
____
____
Last edited by MR_LUV; 06-23-2020 at 04:00 AM. Reason: Awarded 10 Year Badge
#3
sorry if its off topic, but i didnt feel the need to start a new thread since this one was at the top.
how difficult is the install for fog lights on an 05 (1-10 scale) and whats the estimated time it would take?
how difficult is the install for fog lights on an 05 (1-10 scale) and whats the estimated time it would take?
#4
arg... if u were in Cali I'd pretty much give them away (that cheap) - I have a brand new set and don't have a Scion anymore.
__________________
__________________
Last edited by MR_LUV; 06-23-2020 at 04:03 AM. Reason: Awarded 10 Year Badge
#5
^^^ damm but im not planning on buying them now probably in like 2 - 3 months, after i get HIDs and the shark fin antenna then ima start saving up for the fog lights
#6
I have a 06 not a 05 but the installation should be just about the same. For my install, I would have to say it was really easy. The lights went right in. The only hard part was installing the relay. My hands are a little big to easily do that, but with enough patience it popped right into place. I think I spent about 1 hour to do the install and part of that time was looking for the keys to the shed to find some ramps to raise the front up a little. There is a pdf on trdsparks with all the instructions on how to install if you want to see the steps involved. http://www.trdsparks.com/install/81025-52130inst.pdf
#8
Originally Posted by thegermangemini
thanx alpha! i was looking for those install instructions. and first post too! :D
doesnt look too difficult.
still think i might have the stealership do it though so i dont have to take my dash apart to put the button in.
wouldn't wanna risk effing something up because im a moron.
#9
Yah lookin for a kit myself... Got some yellow JDM OEM's of EBay but they ended up not fitting...
Need the '06 fitment...
Need the '06 fitment...
#10
I never had to take my dash off to install the switch. Just pop off the little door for the fuse box and you can easily reach in and pop the blank switch cover off. If you can change a fuse, you can install the switch. As for the relay it was not hard to find the correct spot, just to get the part angled to slip it in was the challenge. Since it is behind the panel. Just be calm and remember threatening the car will not help.
#11
Originally Posted by alpha2265
Just be calm and remember threatening the car will not help.
#12
Does anyone know if a pair of Hella Micro De fog lights will bolt up to existing factory area(at bumper fog local), or will it need a special modification ?
Any info. would be much appreciated.
Any info. would be much appreciated.
#13
Bolt??? The fogs are sandwiched into the opening in the bumper. THe fogs come with a plate you place on the front, then you weave the lamp into that and use 3 philp head screws to sandwich the thing into the bumper opening.
I had two egg shaped fogs under my bumper, but I snapped them off on a steep driveway in va beach a year ago.
I had two egg shaped fogs under my bumper, but I snapped them off on a steep driveway in va beach a year ago.
#14
Putting mine in today. i will let everyone know how well those instructions work for an unskilled semi-newb. LOL
#15
Its easy, just remove the bumper, install lights, put bumper back on, install relay, switch and plug in harness and bolt the ground lug.
#16
Originally Posted by cobb
Bolt??? The Fogs are sandwiched into the opening in the bumper. The Fogs come with a plate you place on the front, then you weave the lamp into that and use 3 Phillip head screws to sandwich the thing into the bumper opening. I had two egg shaped fogs under my bumper, but I snapped them off on a steep driveway in VA Beach a year ago.
I absolutely have to use the stock OEM Fog Lights in the area where the fogs go in the lower bumper.. no if/ands/ or butts??
What if I got the OEM knock out cover, and brackets ? Would I then be able to use those on a pair of Hella Micro's ? Does the fog light housing itself NEED to have the screw holes on the sides to then be able to screw into the bracket, etc.??
In other words, will I be able to use my Hella Micro's (if so, what is the process) , or am I screwed.. and have to absolutely buy the OEM Fog Lights??
__________________
Last edited by MR_LUV; 06-23-2020 at 04:28 AM. Reason: Awarded 10 Year Badge
#17
I'm sure you can put aftermarket fogs in the bumper area but then you're going to have to do fabrication and special mounting...
OEM mounts are designed specifically for the OEM fogs...
Also if you have a 06 xA the fogs are designed at a slight angle also in the bumper fog area...
OEM mounts are designed specifically for the OEM fogs...
Also if you have a 06 xA the fogs are designed at a slight angle also in the bumper fog area...
#18
Yeah, I had 2 different pair of aftermarket Fogs. Neither worked out well and bit the bullet and got the OEM ones.
They sure knew what they were doing when they designed them.
__________________
They sure knew what they were doing when they designed them.
__________________
Last edited by MR_LUV; 06-23-2020 at 04:29 AM. Reason: Awarded 10 Year Badge
#20
Originally Posted by salsardxA
i have a set of 04-05 oem foglights never been used if anyones interested.
willing to ship?