2006 xA Factory Installed Aux Jack Repair
Hey, ScionLife!
Been lurking for a while (Thanks for the post on replacing the side mirror. Stupid baltimore drivers.), but now I have a question I have not been able to search my way to enlightenment for. My aux jack has recently been shorting out during use. I lose the entire left channel and no amount of wiggling the cable or holding in a certain position will help. Yes, I also tried a brand-new mini-jack cable. This brings back childhood trauma of bad experiences with off-brand Walkmen. I was hoping I could just get access to the jack and re-solder the contacts or replace it, but I have no idea how to remove the housing around it. I was thinking of subscribing to Chilton's for a month to see if they had instructions, but I am a cheap bastard that believes strongly in the Wisdom of the Forum. Thanks in advance for any guidance. - Alan |
you have to remove the center console to get to it... remove the shift knob and there is a screw in the back cup holder and the front is held on with clips...
|
Thanks for the reply! I did see that screw in the rear cup holder. So if I remove that, I assume the center console will then lift from the back to the front which will disengage the clips or something like that? This doesn't sound too bad...
|
pull up at the front to disengage the clips... and remove the the cover right under the parking brake
|
All times are GMT. The time now is 11:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands