Notices
Scion xA Owners Lounge
2004-2006.5 [NCP61]

Want to pipe in before I sign???

Thread Tools
 
Search this Thread
 
Old May 17, 2006 | 11:50 PM
  #1  
JFS's Avatar
JFS
Thread Starter
Member
5 Year Member
 
Joined: May 2006
Posts: 35
From: Northeast Ohio
Default Want to pipe in before I sign???

I sure could use some reminders to put on my "get this on paper before I sign... " list. I have so far:

1) NO dealer advertising. (paint too fragile.)
2) Radio of recent manufacture. (Are T1806 or T1807 or both the problem with skipping?)
3) Full tank of gas. (as they offered.)
4) Take it around the block before delivery.
5)
6)
7)
etc)
Can you add from there? I'd appreciate it!

JFS
Old May 18, 2006 | 12:34 AM
  #2  
OldYeller's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Scion Evolution
 
Joined: Apr 2005
Posts: 4,402
From: Cucamonga, CA RT66
Default

Can you get it without the front license drilled out?
Old May 18, 2006 | 12:51 AM
  #3  
JFS's Avatar
JFS
Thread Starter
Member
5 Year Member
 
Joined: May 2006
Posts: 35
From: Northeast Ohio
Default

I am sure I can.
Ohio is about to vote on whether to drop the front plate or not .

sure would be nice
Old May 18, 2006 | 12:55 AM
  #4  
Zillon's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 3,976
From: Southeast PA
Default

Not only take it around the block, but take it up to 80, if you can, just to make sure you don't have any vibrations.

I picked my car up, took her up to 60, no vibes... went to drive on the turnpike a couple weeks later, hit 70-75, and I had a moderate vibration through the steering wheel. Went back, had them rebalance all 4 wheels/tires, and align the car.

Also, if they changed out springs or shocks/struts, make sure you doublecheck ALL of the bolts after purchase.
Old May 18, 2006 | 01:05 AM
  #5  
JFS's Avatar
JFS
Thread Starter
Member
5 Year Member
 
Joined: May 2006
Posts: 35
From: Northeast Ohio
Default

Will do.
There's been no mods yet.

I (embarrassingly admitting) had a new Dodge Omni once and it ground the ujoints on left turns. The engine was installed 2" too far to the right and they had to get a crowbar , stand on the bumpers and cram the engine left so it would stop binding the transaxle.

Nice huh?

Oh yeah, I'll ease her up to 80, shortly.
Old May 18, 2006 | 01:51 AM
  #6  
Psyco565's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jul 2004
Posts: 1,813
From: San Diego, CA (El Cajon)
Default

Deffinatley check out the paint and check for dents ect. Inside make sure you take a flashlight to go over for scratches and dings. Check under the car in the front and back making sure that it has never bottomed out or the muffler has moved out of place ect. Then, most importantly, enjoy your new xA!
Old May 18, 2006 | 01:57 AM
  #7  
crisistc's Avatar
Member
5 Year Member
SL Member
 
Joined: Dec 2005
Posts: 51
Default

Where in Ohio are you located... I am in Mentor
Old May 18, 2006 | 04:17 AM
  #8  
JFS's Avatar
JFS
Thread Starter
Member
5 Year Member
 
Joined: May 2006
Posts: 35
From: Northeast Ohio
Default

Got it. Check for dings. I can see using the flashlight in night but what about it the day?

and chrivenki - I live near the Akron-Canton airport. Lots of construction rocks, etc... Nice paint scheme BTW.
Old May 18, 2006 | 07:17 AM
  #9  
HoldFastHope's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: May 2004
Posts: 556
From: Orange County, CA
Default

This is some valuable and helpful information for owners to be. Make this a sticky perhaps?
Old May 18, 2006 | 01:48 PM
  #10  
oldmanatee's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: May 2005
Posts: 3,167
From: Center Point, AL
Default

Even if you must run a front plate, you can attach it to the lower grille with long bolts, so tell the dealer NO HOLES!!!!

(Sorry, pet peeve)

You get 3 free oil changes from Scion, if your dealer offers your first one free, remind them that makes 4, not 3. I went round and round about that, it isn't worth the hassle.
Make sure all the windows raise and lower at the same speed as it's opposite. If one is slow, weak motor.
If you got Scion mats, make sure that they fit....
Old May 18, 2006 | 05:44 PM
  #11  
JFS's Avatar
JFS
Thread Starter
Member
5 Year Member
 
Joined: May 2006
Posts: 35
From: Northeast Ohio
Default

Thanks everbody. Keep 'em coming.

Signed today for the white manual basic xA. Its incoming by rail to Chicago now and should be here by carrier in a week.

Since I did not order mats, I have to use that self-sticky carpet protector vinyl in the meantime.

Had it put on the purchase order NO license plate holes to be drilled. AND NO dealer stickers, plates, of any kind.

So lets see what they come up with, how it looks and how she drives. So in the meantime, more suggestions please.

$13320 delivered. No hassles.
Old May 18, 2006 | 07:00 PM
  #12  
oldmanatee's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: May 2005
Posts: 3,167
From: Center Point, AL
Default

That is a great deal!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CrowJenkins
Scion tC 2G Owners Lounge
5
Oct 9, 2015 10:47 PM
sccarally
Regional - Lonestar
1
Sep 27, 2015 09:24 PM
vi3tb0i09
PPC: Engine / Drivetrain
2
Sep 23, 2015 08:32 PM
wayneside
Regional - Southeast
0
Sep 23, 2015 10:42 AM
wayneside
Regional - Pacific Northwest
0
Sep 23, 2015 10:29 AM




All times are GMT. The time now is 09:52 PM.