i need halp!! i bay trd kit for ist ncp61(xA) but have not install doc. where i can take iol lubrikant on engene 1nz-fe for turbo???

 

?english?

 

Alex, in the US market TRD does not make a turbo kit. If you're looking for a place to tap into for the oil feed to a turbo, use a t-adapter with the oil pressure sensor on the front of the block to the right of the alternator and behind the intake manifold.

Greddy posts their install manual online. I'm not sure what turbo you have, but if it's similar it should help you. The instructions are in english.

http://www.greddy.com/img/PHP/products/pdf/1229.pdf

You'll also need to tap the oil pan for a return line if your kit didn't include a pre-tapped pan.

 

Did you got it used? make sure you got all the parts included on the kit, if it is the TRD kit It will have all necessary parts.

I've never seen an install guide for it. maybe this can help you a bit: http://www.trdparts.jp/turbo-catalog-plan.html (at least to confirm if you're missing parts)

Do you by chance speak Japanese?

 

sorry for my english..... i am russian
and thanks for information.trd kit used.