how so you get the middle insert off the door panels so you could rewrap that part of the door. i see that it is seemed together somehow but how do you get it apart
thanks for any help

 

I do not recommend that you remove that center insert. Dealers and upholstery shops just overlay leather on the existing cloth material. That panel is held in place by plastic rivets that were melted on. You would have to break those, carefully then re-weld them using heat and plastic. It can be done, but I don't recommend it.

 

ok so you would just lay the new fabric over the exist fabic

 

You can check out my site. Been a while since I posted here, but I have some how-to pics. http://home.netcom.com/~rcstprez/interior.htm

MattB

 

thanks and what kind of bags are you using for your rear setup

 

They are the ones that came with the easy street kit.

 

nice write up on all of that... that should really help out alot of people... did you get the front fixed yet?

 

that insert is part of the door, not designed to come off. you can cut it out but putting it back and attaching it might prove to be a bit difficult.

 

Hey Matt, could you do a writeup of how you painted the top of the door panel, will the edges look crooked and broken etc....what is SEM plastic dye?