Randode cold cathode mounting (tC)
#1
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Apr 2005
Location: Wenatchee, WA
Posts: 266
Randode cold cathode mounting (tC)
I've everything all set up, and my front cathodes are mounted. my only problem is i have no idea where to mount the power inverters and cathodes under the seat. there isnt much clearance and I cant seem to find anything decent to zip tie it to. How has anyone else done it?
Also, Did you pull the wires UNDER the seat tracks next to the center console? ATM my inverters and cathodes are just sittin on the floor
Help!
Also, Did you pull the wires UNDER the seat tracks next to the center console? ATM my inverters and cathodes are just sittin on the floor
Help!
#2
It is kind of a pain, but you just have to find a couple of spots on the metal underframe of the seat to zip it to. If I remember right I had to do mine a little crooked to make it work. Just find a good spot for the inverters and zip them up.
I've had no problems with mine up to this point. As for the wires, again, if I remember correctly, you pull them under the tracks and up through the hole in the carpet with the other seat wiring.
Basically just do what you have to do to make it work and it should all turn out ok, if that makes sense. Don't worry about it too much.
I've had no problems with mine up to this point. As for the wires, again, if I remember correctly, you pull them under the tracks and up through the hole in the carpet with the other seat wiring.
Basically just do what you have to do to make it work and it should all turn out ok, if that makes sense. Don't worry about it too much.
Thread
Thread Starter
Forum
Replies
Last Post
randode
Scion xA/xB 1st-Gen ICE & Interior
44
06-29-2004 04:19 PM
Besk_one
Scion xA/xB 1st-Gen ICE & Interior
6
11-17-2003 09:28 PM