BUMPSTOPS
#1
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Jun 2003
Location: San Gabriel Valley
Posts: 831
BUMPSTOPS
Okay guys and gals...this is driving me insane.
I know we are supposed to cut the bumpstops when going below 1.75, but the real question is by how much do we cut them...1/2, 1/3, 1/4???
And will cutting the bumpstops have any effect on the height in the front? Say with the Spy springs...if I cut the bumpstops, will it lower the front any?
I think the Suspension FAQ should include a shpiel about the bumpstops, especially if everyone says that they need to be cut, but fails to include by how much.
I know we are supposed to cut the bumpstops when going below 1.75, but the real question is by how much do we cut them...1/2, 1/3, 1/4???
And will cutting the bumpstops have any effect on the height in the front? Say with the Spy springs...if I cut the bumpstops, will it lower the front any?
I think the Suspension FAQ should include a shpiel about the bumpstops, especially if everyone says that they need to be cut, but fails to include by how much.
#3
Originally Posted by bBted
its not gonna affect the height...
u should cut it in order to give struts travel...
i cut half of the bumpstops
u should cut it in order to give struts travel...
i cut half of the bumpstops
Thread
Thread Starter
Forum
Replies
Last Post
KillaSpiceTSW
Scion tC 1G Suspension & Handling
15
06-10-2010 01:30 AM
Soon2BxB
Scion xA/xB 1st-Gen Suspension & Handling
16
03-31-2005 03:47 PM