I just finished clearing my turn signals in my headlight using the "beat the crap out of it with a hammer and screwdriver" method. I came out really nice. Now I just need to get me some chrome turn signal bulbs.

 

nicely done

 

Looking good. I was really scared at first but I said "what the hell" and did it anyway. It's very easy and I'm glad I did it now!

Mike R.
rolex87

 

That what I was thinking also. I was going to do it the other day when I was doing my intake, but I had to finish up to go somewhere. This morning I said that I'd do it and I did. I wanted to see if I could take out the headlight without taking off the entire bumper and you can. If you take off your grill, undo the two screws under the grill and the push pin in the middle and the two screws by the tires, you can pull the bumper enough to get to the screws for the lights. That's what I did.

 

Looks good - I think the headlights look so much better cleared out.
Hit me up if you need some chrome 1157s, I have them in amber or superwhite.

 

I just cleared my corners tonight. Taking off the bumper was the easy part, but for me, shattering the reflector was the hard part. I must not have been hitting them in the right place. So, I gave up on that and baked the lights in the oven to loosen the glue. I pryed the lenses open and took out the reflectors that way... re-heated them and stuck the lenses back on... hopefully I won't have leakage later, but everything looks OK. Gonna get bulbs tomorrow, assuming there's a parts store open.

 

lol, leakage? what's gonna leak? the light? hehe..j/k. I'd put a few applications of silicone so you don't get moisture...

 

I did the hammer method as well. Worked nicely. One thing I did was to cut up a few shop towels and stuff them in the hole first. This way when I shattered the orange plastic it didn't risk scratching the inside of the light.

 

What's the recipe for doing them in the oven?
Seriously tho' what temp (I'm guessing as low as possible :? ) and how long?

 

i want to know the temp aswell

 

https://www.scionlife.com/forums/vie...headlight+oven

 

what is the method with the hammer? This is the first time I have heard of this and it seem squite easy.

 

https://www.scionlife.com/forums/vie...adlight+hammer

 

I may just have to do that... looks pretty sweet!

 

Does anyone know where to get those bulbs that look blue but flash amber?

 

ebay

 

what're they called?

 

My only question is, does the light still shine amber brightly out the side? I gotta know before i break it, cuase of the cops.

 

pep boys has APC black chrome lights that glow amber and they also have the sylvania silverstar blue bulbs that glow amber. my friend has a toyota matrix and he gave me his black chromes when he bought the blue ones at pep boys.