DIY: Put your favorite character in your tail lights!!!
11-05-2003, 09:47 PM
#1
Senior Member
SL Member
sIcKsCiOnS
sIcKsCiOnS
Thread Starter
Join Date: Aug 2003
Location: Mtn. View, CA
Posts: 339
DIY: Put your favorite character in your tail lights!!!
This was originally written for a honda, but for those adventurous people out there... try at your own risk!!! 
Character? Tail
Material & Tool: Character doll of taste, bond, silicon and hot bond, color spray(silver), hot cutter, sandpaper
1) This time it keeps producing with the tail lamp of HONDA life. When the rear gate is opened, volt/bolt 2 being to come out, you remove that, remove the tail lamp.
2) Using the hot cutter, it keeps cutting the turn signal and the back lamp section which are on reverse side of the tail lamp.
3) When it cuts, because the lens of the orange color appears in the turn signal section, you remove that. The turn signal section is the case that it has become clear
color with this.
4) Shaving Bali of the cutting section politely with the sandpaper, it trains. Next
pedestal and reflector シルバ? It paints with the color spray.
5) When paint dries, favorite the character doll is installed in the pedestal at the bond. Because the orange lens has been removed, be sure to exchange the light bulb to those of the orange!
6) You reset on the basis of the lens which is cut lastly. After adjusting connection to
beginning at the hot bond, in order to prevent the invasion of the water, when coating
it does connection with silicon, completion.
7) Perfect it will decide with the character of the taste. You recommend to the father
where the child is.
Character? Tail
Material & Tool: Character doll of taste, bond, silicon and hot bond, color spray(silver), hot cutter, sandpaper
1) This time it keeps producing with the tail lamp of HONDA life. When the rear gate is opened, volt/bolt 2 being to come out, you remove that, remove the tail lamp.
2) Using the hot cutter, it keeps cutting the turn signal and the back lamp section which are on reverse side of the tail lamp.
3) When it cuts, because the lens of the orange color appears in the turn signal section, you remove that. The turn signal section is the case that it has become clear
color with this.
4) Shaving Bali of the cutting section politely with the sandpaper, it trains. Next
pedestal and reflector シルバ? It paints with the color spray.
5) When paint dries, favorite the character doll is installed in the pedestal at the bond. Because the orange lens has been removed, be sure to exchange the light bulb to those of the orange!
6) You reset on the basis of the lens which is cut lastly. After adjusting connection to
beginning at the hot bond, in order to prevent the invasion of the water, when coating
it does connection with silicon, completion.
7) Perfect it will decide with the character of the taste. You recommend to the father
where the child is.
11-05-2003, 10:29 PM
#4
Senior Member
SL Member
Join Date: Jul 2003
Location: North Los Angeles County
Posts: 2,627
Originally Posted by GreatWhitexA
Haha, that looks like a cool mod. Where do you find those ideas from? By the looks of it, its from a japanese site. :D
11-05-2003, 11:16 PM
#6
Member
SL Member
Join Date: Jul 2003
Location: Orange County
Posts: 79
Originally Posted by George
Originally Posted by GreatWhitexA
Haha, that looks like a cool mod. Where do you find those ideas from? By the looks of it, its from a japanese site. :D
interesting mod...
l. garcia
11-08-2003, 02:29 AM
#13
Senior Member
SL Member
Scion Evolution
Join Date: Sep 2003
Location: Chicago, IL
Posts: 1,214
If you could find a little Trogdor for me to put in there, I'd be all over it! Imagine his beefy arm flexing at the cars behind me at stoplights! And the red from the bulb would just look like burnination. be still my heart!
