My '05 xB has fog lights. They are located in the rectangular spaces just below the hedlights. There is no mention of them in the owner's manual or on the original window sticker. Were they available from the factory, or just aftermarket?

 

Those are factory units.

 

One of them is a little loose. Can I tighten it from underneath?

 

I believe there is a little plastic circular piece that pops onto the bumper somewhere - sorry I can't remember specifics since I've had them awhile now but here is a picture of one of the fogs if someone else can help.

 

Thanks, I'll check it out tomorrow since it's Labor Day and no work.

 

That's not a picture of gen 1 fogs its the side markers on the front fender
Here is an install pdf for the fogs you can reference. Make sure you have all the parts on the back of fogs. some owners bought OE like e-bay fogs that did not come with adjuster and bracket to keep them form moving and installed them anyway. If you need the parts they are cheap from dealer. also 3 pics of whats supposed to be on the back of the fogs or stuck in the mounting hole of the bumper. good luck

1 bumper mounting hole [pivot goes in hole on far right, bracket in top whole on left, adjuster in bottom hole on left- you can see screwdriver access(rectangular) hole to turn adjuster when aiming fogs]

2 fog light bracket (white) and adjuster (black)

3 light bulb socket, vent (small round black) and pivot point [if foam on pivot is worn clean it and put one layer of black electrical tape for substitute]

PDF http://scionlife.org/Scion_Docs/Inst...xBFogLamps.pdf

1

2

3