the long road
04-13-2009, 08:29 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Hellam, PA
Posts: 950
the long road
its gonna be a long trip but im enjoying myself along the way. i put on the passanger side skirt on lastnight. the list of body stuff to do is neverending. i also shaved the hood squirters, and the tailights......this will be the last kit i ever put on too
cut off the inner fender tabs, who needs them
tailights gone, just need to add my new ones and lay down some filler on it
started grinding it down a little, and what do i find, one big ___ ____ing hole! im not to happy about it. there are so many ____ up in this kit, next time i glass my own one off kit :supz:
finally took the sander to the driver side skirt and....suprise suprise a ton of low spots. after it was blocked, the light gray is all a giant low spot
cut off the inner fender tabs, who needs them
tailights gone, just need to add my new ones and lay down some filler on it
started grinding it down a little, and what do i find, one big ___ ____ing hole! im not to happy about it. there are so many ____ up in this kit, next time i glass my own one off kit :supz:
finally took the sander to the driver side skirt and....suprise suprise a ton of low spots. after it was blocked, the light gray is all a giant low spot
04-20-2009, 01:20 PM
#20
Senior Member
SL Member
Join Date: Aug 2004
Location: Baltimore, MD
Posts: 220
Did you use bondo to fill in the foglight area? If so I think you may run into cracking issues around the seam later down the road due to vibration and expansion and contraction of the bondo.
Looks good though.
Mike
Looks good though.
Mike