anyone had a problem aiming these? i ordered mone on Thurs, delivered Fri ( Ebay - atomic street ). After the install, i tried aiming the lights, and the left one is all the way down, the right all the way up - just to get the lowbeams aimed deacently. Left side still way out to left, and both left and right too high... Once i turn on highbeams, you can really see that they are way out of allighnment - one side all the way up to the sky, the other side on the street, nect to my bumper. i will post pix soon. i checked all the mounts, and the lights are in the sockets securely. any help?

 

mine only need to be adjusted down on the driver side...its way high compared to the passenger side. but angled to the left, i dont seem to have that problem

 

Advance Auto Parts, but they are available lots of places. They are Sylvania Silverstars #1157, they cost $20 for the pair.

 

ah ok...i was lookin for them when i bought my superstar bulbs last night at wal mart and they didnt have them. i will try advance auto or some other places...thanks again

 

Is the up/down adjustment on the bottom outboard? I think the L/R is top/inboard. Is this correct? I need some very slight adjustment.

 

yeh the up/down adjustment is on the bottom. its hard to get a screwdriver in there to turn the screw...i havent adjusted them yet...i think im gonna end up taking the headlught out again to adjust it. but i dunno yet...depends on when i can work on it and how much time i have...

 

on mine, the up down is on top, the left right is below. if you have a short screwdriver, you can reach inside and get it from the back with minor back contortions....

 

anyone remove th high beam bulbs, if yes, can you give a quick walk through? i have no experience with h1 bulbs, do you unscrew the thing, or is there a spring clip? i should have played with them a bit before i installed them...

 

I did not take mine out, but I did uncover them. It looks like a spring clip. Are you changing them? I am happy with my highs. The lows looked quite amber but the highs have a nice pattern and color.

 

no plans yet to change them, one of the hb bulbs looks crooked and i want to try to adjust it

 

How is the fit on these?

 

I'm glad I'm no longer the only one who had problems with these lights and their adjustability. I was wrong when I thought these were JDM ,the box is my first import, that why I thought they were JDM because they were completely backwards from what I was used to, so I'm sorry if I misspoke. These are of good quality just wished I hadn't got a bad set.

 

Man, from reading this psot, I'd have to turn these down like the other halo type headlamp replacements.

Do they all suck or what. I hear endless complains.

 

i actually like these...im quite pleased with them!

 

No. See page four of this thread for my night pics. The beam pattern is great.

 

i like mine, but yes i got a set that was put together wrong, one side is completely up, the other is completely down... i can adujust the headlights to aim pretty good, but the high beams are way off...

 

I just installed them and when I drove home I noticed their fogging going to check them tomorrow it might have been my fault. But if it wasnt then I am calling k2 soon about them. Any thoughts?

 

Mine fogged the other day when I drove through a bad snowstorm and it piled up against the headlights. They cleared up after I cleaned them off.

 

Thx but its not raining or anything so I dont know whats up. Going to check the gaskets on the back of the light and see if any arnt sealed up right

 

Ooh I like and I want!!!