Wiper spitter relocation
 

Almost two years ago I put on my Carbon fiber hood that did not have holes for the spitters,So I had none.Today I was walking around the junk yard looking for MOD ideas and came up with this.
I took the spitters off the wiper arms from a Mitsibitshi dont remember which one,Lots of different cars have them but there were the newest looking ones.
I pulled the cowling off and ran the washer hose under to each side and out thru the hole below each wiper arm,Reinstalled the cowling ran the hose up thru the spring on the wiper arm and installed the spitters works great.And gets rid of the washer hose under the hood for a cleaner look.

http://inlinethumb62.webshots.com/58...425x425Q85.jpg

http://inlinethumb20.webshots.com/36...425x425Q85.jpg

http://inlinethumb44.webshots.com/29...425x425Q85.jpg

http://inlinethumb15.webshots.com/46...425x425Q85.jpg

Scott

Good job scott. looks good hope to see it in person soon. later

Looks good, im gonna try putting them in the area right between the winsheild and hood first