Wiper spitter relocation
#1
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Wiper spitter relocation
Almost two years ago I put on my Carbon fiber hood that did not have holes for the spitters,So I had none.Today I was walking around the junk yard looking for MOD ideas and came up with this.
I took the spitters off the wiper arms from a Mitsibitshi dont remember which one,Lots of different cars have them but there were the newest looking ones.
I pulled the cowling off and ran the washer hose under to each side and out thru the hole below each wiper arm,Reinstalled the cowling ran the hose up thru the spring on the wiper arm and installed the spitters works great.And gets rid of the washer hose under the hood for a cleaner look.
Scott
I took the spitters off the wiper arms from a Mitsibitshi dont remember which one,Lots of different cars have them but there were the newest looking ones.
I pulled the cowling off and ran the washer hose under to each side and out thru the hole below each wiper arm,Reinstalled the cowling ran the hose up thru the spring on the wiper arm and installed the spitters works great.And gets rid of the washer hose under the hood for a cleaner look.
Scott
Thread
Thread Starter
Forum
Replies
Last Post
Xaphoon
Scion tC 2G Suspension & Handling
0
09-21-2015 02:18 PM
Boomshaker
Scion xB 1st-Gen Owners Lounge
1
06-28-2015 02:37 AM