TheScionicMan

Check this list:

http://www.eautoworks.com/html/Searc...5-SCION~xB.htm

The bulb is a DE3175 - I picked mine up at WalMart - I'll check the packeage at home - it was a 2-pack...

rallyxb

The LED dome light is cool, but I was hoping for something brighter.
Do you think the Raybrig R104 Super bright Dome Light 10W would fit?

http://www.eautoworks.com/html/ORD-1-1-1-23515.cfm

TheScionicMan

Says it will:

Davestoaster

I took the harder way out and fished some wires to the rear and added another factory dome light I bought from the dealer over the cargo area. Wasn't real hard to do, and it came out perfect. Actually it was so easy, I'm going to find a Toyota part for map lights for the rear view mirror in the front.

MotoMan_YZ400

I accually installed 2 small LED array (3 LEDs per array) in the back "trunk" area, and wired them to the mid dome light.... So that way they come on when the dome light is on..... looks nice! Illums the rear trunk, and still fades w/ the dome too! cost $10

WheelSee

grr instead of the white one they shipped me a red one

~wC

rallyxb

The LED's fade in & out?

Sweet!

WheelSee

yeah it fades just like the regular dome light does...

~wC

kixelsid

I got a Green replacement bulb for my camo green xB and it is brighter and it does fade out after u lock the doors like the stock light. The effect is nice and for $5 from ebay its the cheapest 'toy' i have added (also super easy to install - pop dome cover off, pull out old light, push in new one, replace cover).

etarui

Do you have pics of the install? I am mainly curious about the actual mounting of the light, not the wiring. How does it mount to the roof?

SWiSS

I confirmed by e-mail that the LED domelights are not as bright as stock, but they have a Xenon bulb that IS brighter than stock at www.autolumination.com . However, u dont get the cool colors

rallyxb

A Xenon bulb?!
Sweet!
:D
Can you please post the part number?

WheelSee

part number please....

~wC

SWiSS

http://autolumination.com/festoon.htm
towards the bottm

Davestoaster

I have pic's.....just no place to store them anymore. But anyways, I made a "Plate" out of thick plastic sheet I bought at Home Depot. The plate was about 6" by 6" square. Then I laid the new dome light on top of that and traced a pattern of the dome light. The area that needed to be cut away to make the light sit flush with the headliner. I cut out the pattern with a sabre saw and drilled the 2 mounting holes. After you cut the hole in the headliner, (scary part) you just line everything up, screw it to the plate, and it holds tight. You still need to glue the plate in place on the inside of the headliner, cause I found that it still moves around even though it is screwed down tight. I used 2 part epoxy. The whole job a few hours, but it was really worth it.

rallyxb

Anyone know what the bulb size is?
:?:

xvolcomx88

i purchased the blue and super white led dome lights from www.autolumination.com. Neither are as bright as the stock one but the white one looks better cuz its much whitier than stock. Bulb size is 31mm.

hotbox05

i was told the blue leds will be brighter than stock. who cars brighter than trying to color or mask the stock bulb.