Just wondering if anyone has one of these for thier xB?? I found one on

www.eguages.com They have a two three or four guage pod I believe, or maybe one two or three, can't remember.... :?

Anyway just wondering if someone has some input on them.

Also I want to put a volt and a/f ratio guage in a two pod version. Now I know how to install the volt guage, but I am wondering how to do the a/f guage. Normally I get a pigtail that goes into the stock o2 sensor. I can't always splice into the 02 sensor wire on my xB, but I have no idea where that is. Can anyone help with this???

Thanks.

 

Damn..Pop-ups up the ___ on that site..
herhe

https://www.scionlife.com/forums/vie...hlight=apillar

 

when i get my car back from nology i will let you know what the wire code is

 

Thanks for the info. I did a search, but I searched for guage pod and not apillar and couldn't find anything. As for the number from nology that would be a hugh help!!!!

 

Here's a set that Team Prototype has out:

http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

 

Just wondering if you have gotten your car back???

 

got my car back on Saturday. underneath you glove box is the ecu. it is covered by a black cover. take it off and look or the second plug from the left. Pin four should be wire that is black with a red runner that is the first sensor. the second sensor is on the fourth plug from the left. Pin 4 should be white with a blue runner.

You can tap into one of those wires. I went with the black/red. Let me know how the install went and show some pictures

 

Thanks for the info. I don't have the guage yet. I decided to tint windows first. I am going to do this within a month or so. I will post some info on the install when done.

Thanks again.