Rear Sidemarkers
05-18-2005, 10:58 PM
#2
Banned
SL Member
Team N.V.S.
Scinergy
Scion Evolution
Scinergy
Scion Evolution
Join Date: Jul 2003
Location: 886motorwerx
Posts: 4,770
Its easiest to unbolt the rear bumper cover to unbolt the rear side markers. All you need is a 10mm socket and rachet.
Remove the bolt by the rear tires, the ones you see when you open the hatch, and the ones underneath that hold the bumper and rear lip in place. Pull out slightly, and set the whole assembly on a blanket on the ground.
Unplug the wireloom, unplug the light bulb, unbolt the side marker, and re-install.
Of course, if you aren't using a marker for Toyotas, you'll have to "T" tap or slice the wires in place and shrinkwrap them.
Shouldn't take long at all.
If you were in the Bay Area I would be able to help you with it.
HTH.
Remove the bolt by the rear tires, the ones you see when you open the hatch, and the ones underneath that hold the bumper and rear lip in place. Pull out slightly, and set the whole assembly on a blanket on the ground.
Unplug the wireloom, unplug the light bulb, unbolt the side marker, and re-install.
Of course, if you aren't using a marker for Toyotas, you'll have to "T" tap or slice the wires in place and shrinkwrap them.
Shouldn't take long at all.
If you were in the Bay Area I would be able to help you with it.
HTH.
05-18-2005, 11:09 PM
#3
Junior Member
Thread Starter
Join Date: May 2005
Location: Asheville, NC
Posts: 5
cool thanks for the info i seen the bolt you were talking about when i got under the car, it's just hard work around with dirt falling in your eyes LOL. I don't even no if the sidemarkers i got will cover that hole??? Their thinner than the factory ones.
Thread
Thread Starter
Forum
Replies
Last Post
PTUNING
PPC: Engine / Drivetrain
3
12-11-2014 08:09 PM
PTUNING
Exclusive Sponsored Sales
0
12-06-2014 03:58 PM
umnitza
Exclusive Sponsored Sales
3
12-01-2014 06:26 PM