Notices
Scion xB 1st-Gen Owners Lounge
First Generation 2004-2006.5 [NCP31]

Solution to Dash/pass. Door Rattle

Thread Tools
 
Search this Thread
 
Old Aug 29, 2005 | 12:58 AM
  #1  
TacoBallZ's Avatar
Thread Starter
Junior Member
5 Year Member
 
Joined: Jul 2005
Posts: 25
Default Solution to Dash/pass. Door Rattle

OK, here is my take on it. I was freaking out, otherwise perfectly quiet ride except a buzzing rattle from where the dash meets the fron passenger door. OR SO I THOUGHT!
OK so after inspecting the interior, and not finding any parts that may be rubbing, I check under the hood. Lo-and-behold! The air intake screen! it was in the right place. I tapped on it. Buzz Buzz Buzz This was it! The wind must be making the screen vibrate against the plastic.

Simple solution: Get some automotive silicone (my uncle gave me some windshield silicone. Nasty black stuff) and put a dab in between the mesh and the plastic.
This did the trick! Also, I put some double sided sticky foam between that air intake plastic and the windshield itself. All of this has made my ride 100% silent (except rattling license plate in rear Grrrr) ok I'm gonna take some pictures and post them in a bit.

I hope this helps everyone else!

(PICS!)




And my xB, showing off clear Lunds Bug Deflector
Old Aug 29, 2005 | 03:39 AM
  #2  
Makdaddi0's Avatar
Member
5 Year Member
 
Joined: Nov 2004
Posts: 36
Default

I had different speakers put into the doors and my passenger door always did that! I was about to go get dynomate in the door but Ill try this out tomorrow! Thanx!
Old Feb 3, 2006 | 10:07 PM
  #3  
proctorsilex's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2005
Posts: 403
Default

ARG!
Damn, that's got to be the noise that I keep hearing right in front of my speedometer. It's right in the center at the bottom of the windshield and it sounds like it's right under the hood. I hear it usually when accelerating.

Thanks a ton. I don't know how long it would have taken me to find that!

I hate the licence plate noise too. Gonna do something about it soon.
Old Feb 3, 2006 | 11:34 PM
  #4  
OakToddler's Avatar
Banned
SL Member
 
Joined: Jan 2005
Posts: 984
From: Bergen County
Default

thanks for the info


I had the lic. plate noise too, the dealer changed the screws.
Old Feb 4, 2006 | 05:26 PM
  #5  
YELOSUB's Avatar
Senior Member
10 Year Member
5 Year Member
Wagonistas
SL Member
 
Joined: Mar 2005
Posts: 4,080
From: AZ
Default

Good find...
Old Feb 4, 2006 | 06:38 PM
  #6  
zyton7's Avatar
Member
10 Year Member
5 Year Member
 
Joined: May 2005
Posts: 39
From: Gettysburg, PA
Default

i had the same problem with my xa. so i took apart the windshield wiper cover. i saw that the part that butts up against the bottom of the glass was missing the black foam padding on the one side. so i got some foam padding for window insulation that had a sticky side and put a strip across it. about 2ft long. now the rattling has gone. even when i accelerate .
Old Feb 4, 2006 | 07:28 PM
  #7  
stick_1NZ's Avatar
Senior Member
10 Year Member
5 Year Member

SL Member
 
Joined: Apr 2004
Posts: 3,993
From: Abra, Philippines
Default

good find. i'll check out mine if it does the same thing.
Old Feb 4, 2006 | 09:50 PM
  #8  
Mosh_xB's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Jul 2005
Posts: 608
From: Long Island, NY
Default

Originally Posted by stick_1NZ
good find. i'll check out mine if it does the same thing.
me too!
Old Feb 4, 2006 | 10:02 PM
  #9  
2006XB's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Sep 2005
Posts: 107
From: The Poconos
Default

nice. i'm glad somebody found it. i thought it was some little gremlin from japan that like messing with me.
Old Feb 4, 2006 | 11:43 PM
  #10  
blimey's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2005
Posts: 175
From: Powell, Ohio
Default

Man this has been driving me nuts.I hope this fixes my buzz too(uh the car's buzz)I have the license plate noise too
Old Feb 5, 2006 | 12:57 AM
  #11  
dmxsoulja3's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Apr 2005
Posts: 391
Default

my pass side door, where the lock part goes up and down rattles, can't wait to swap the speakers out and do something with it.
Old Feb 5, 2006 | 12:58 AM
  #12  
bB2NER's Avatar
Senior Member
10 Year Member
5 Year Member
Music City Scions
SL Member
 
Joined: May 2004
Posts: 11,808
From: West TN - Land of twisty roads
Default

I'll try it and see if it helps. I got the plate noise fixed. Put some strips of self sticking foam insulation behind the plate so it can't vibrate. It worked for me.
Old Feb 5, 2006 | 11:15 AM
  #13  
Sciond's Avatar
Senior Member
10 Year Member

5 Year Member
Fail, INC
Club One

SL Member
 
Joined: Nov 2004
Posts: 14,929
From: What's in your Box...
Default

gonna try it good find.....
Old Feb 5, 2006 | 02:35 PM
  #14  
blimey's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2005
Posts: 175
From: Powell, Ohio
Default

Checked mine this morning.Those screens are loose.I siliconed em for now.I will take the cowling out and fix them properly later.I'm surprised Toyota would let this slip by.
Old Feb 5, 2006 | 06:56 PM
  #15  
rebelMan's Avatar
Senior Member
10 Year Member
5 Year Member
KAD
SL Member
 
Joined: Feb 2005
Posts: 1,197
From: Sarasota, FL
Default

Cool, i can eliminate another annoying noise
Old Feb 9, 2006 | 07:47 PM
  #16  
san_matthew's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 168
Default

Thank you Man! Thanks for looking out for us!
Old Feb 10, 2006 | 05:20 PM
  #17  
TacoBallZ's Avatar
Thread Starter
Junior Member
5 Year Member
 
Joined: Jul 2005
Posts: 25
Default

Glad to see that this thread is still helping out some people. I'm at 11K miles now and recently my front passenger locks are starting to vibrate (Buzz) a little when locking/unlocking them.
(silly story)
I also thought I was having a major problem with the passenger door making noises until I figured out that it was a phillips head screwdriver i left in the door cubbyhole that caused additional vibration when the door locks/unlocks *slaps forehead* Putting the screwdriver away made the noise less noticeable, but *I* still notice it even if my passengers don't.
Old Feb 18, 2006 | 04:29 PM
  #18  
DavesX's Avatar
Member
5 Year Member
 
Joined: Feb 2006
Posts: 43
From: Detroit, Michigan
Default

I solved the licence plate noise by installing well nuts in the bottom holes. You have to drill a 7/16" hole but the well nut is a threaded insert that surrounds the bare metal. I did touch up the metal with some paint before installing the insert though.
Old Jun 14, 2006 | 05:17 PM
  #19  
Ethereal_Dragon's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2004
Posts: 108
From: USA
Default

I have been meaning to post about this for months, but I am sort of lazy, and I haven't.... I will have to check this out on my lunch break... I hear a vibration / rattle from the center of the dash... BUT, the vibration is only audible when the engine RPM's are between about 2500-3000 RPM's....
Old Jun 16, 2006 | 02:20 AM
  #20  
Bartx7000's Avatar
Member
10 Year Member
5 Year Member
KAD
SL Member
 
Joined: Jun 2004
Posts: 55
From: Tampa, FL
Default Rattle

Ya mine has a bad rattle in the dash only when the car is cold (little blue light on) and the idle is higher than normal. When it warms up and the iddle drops it is fine.
One day I gotta pay attentiona and figure out what it is.



All times are GMT. The time now is 12:22 AM.