i bought more fog lights they have the the clip thing and everything just to connect them on when i removed my front bumper i saw two clips that look like they are for fog lights on each side close 2 the lower grill does any one know if those are for the fog lights and if i just connect the lights there will they go on when i get them or do i have to do something for my fog lights to work? help PLZ

 

Very easy install, should take you about 2 hours. Be very careful taking the bumper cover off and make sure u put a large blanket down on the ground to rest the bumper cover on so u don't scratch it, good idea to have someone to help you with removing and putting back the bumper cover. Once the cover is off, you have to remove the lower grill and cut where instructed to, there are indentations where to cut the grill, take your time doing this. After you cut the grill, the foglights clip into the area you just cut, plug the wiring harness in and reattach the bumper cover, then put in the switch and all should work fine. Good luck.

 

so i do need a extra switch i tought they would turn on when u turn on the lights

 

Here is the link to our site: http://www.trdsparks.com/displaypart...&parts_id=1571 On the top right corner you will see we have the installs for the fog lights. That should help answer any questions that you may have including the switch. Let me know if you have any other questions.

Jamie