2010 BCM xB2 new pic**
#1
2010 BCM xB2 new pic**
here is a follow up on my las pics.......new springs installed Tanabe nf210, blacked out front emblem ..
let me know what u guys and girls think ,,,thanks...
SCIONXB2SIDE.jpg?t=1285456818
let me know what u guys and girls think ,,,thanks...
SCIONXB2SIDE.jpg?t=1285456818
Last edited by MR_LUV; 01-12-2018 at 09:19 AM. Reason: typo
#5
Yeah, hope to represent like you ...really like your xB2 ...is that a vinyl overlay over the whole car.
And what size rims are u running up front ...offset to.I like them.
thanks pasquale
And what size rims are u running up front ...offset to.I like them.
thanks pasquale
Last edited by MR_LUV; 01-12-2018 at 09:16 AM.
#6
jenandjason051.jpg?t=1285549011
here is a before for reference for people interested in tanabe springs.
after.........
SCIONXB2.jpg?t=1285549083night shot with phone hahaha........
SCIONXB3.jpg?t=1285549146I really love these shots tanabe nf210 vs tanabe df210
here is a before for reference for people interested in tanabe springs.
after.........
SCIONXB2.jpg?t=1285549083night shot with phone hahaha........
SCIONXB3.jpg?t=1285549146I really love these shots tanabe nf210 vs tanabe df210
#9
Its actually all paint. Its fine though most people think its vinyl lol. Keep it up man! you're representing already =D
#10
Thanks pasquale i really love this xB2 I found from axis........
http://www.axiswheels.com/view-project/2008-scion-xb
the one 2nd pic down that is so clean the new one is overkill...............just my opinion.
http://www.axiswheels.com/view-project/2008-scion-xb
the one 2nd pic down that is so clean the new one is overkill...............just my opinion.
Last edited by MR_LUV; 01-12-2018 at 09:16 AM.
#12
murphy's law.................my xb is lowered that is a before pic here it is now...hahahaha....
SCIONXB2SIDE-1.jpg?t=1285732849
17 inch scion wheels for now...
trd inlet vent
modded air box
tint 2 front windows
oem fogs
oem spoiler
blacked out front emblem
de-badged all rear emblems
6000k hid low beams
3000k fogs yellow
tanabe nf210 springs.....................thanks sizzource.
SCIONXB2SIDE-1.jpg?t=1285732849
17 inch scion wheels for now...
trd inlet vent
modded air box
tint 2 front windows
oem fogs
oem spoiler
blacked out front emblem
de-badged all rear emblems
6000k hid low beams
3000k fogs yellow
tanabe nf210 springs.....................thanks sizzource.
#14
Those Scion 17" wheels look good with the NF drop, but they will look even better if you throw some 15mm spacers on the rear to push them out closer to the fenders, like the front wheels.
#16
Yea, 15mm will be fine, and I'll explain why. Your wheels are 17x7 +45, and I'm going to assume 225/45 tires (let me know if I'm wrong about that).
15mm spacers would pull it out to 17x7 +30. I'm running 18x8 +30 in the rear with 245/40-18 tires on NF springs, and I only rub on very rare occasions when pushing it through hard turns, or if it's loaded with people/cargo.
1. Your set-up would have the rear wheel lip 1/2" further in (away from the edge of the rear fender lip) than mine.
2. Your tire radius is 1/2" smaller than mine (meaning an additional 1/2" of fender/tire gap clearance).
3. Your narrower tires have almost 1/2" more clearance from the fender lips than mine.
Your purchase of 15mm rear spacers has just been approved.
BTW, you'll be a lot closer but you still won't be dead flush; although the rears will now match the fronts.
#17
new pic i took today
sorry ut it is dirty there is a water restriction where I live .........
scionplantation.jpg?t=1286069452
10 mm spacers on order from ebay....cionide thanks bro.............
scionplantation.jpg?t=1286069452
10 mm spacers on order from ebay....cionide thanks bro.............
#20