View Poll Results: How helpful was this?
not bad
0
0%
Voters: 18. You may not vote on this poll
A New way to do DIY Tuts. Interior Light DIY (NEW VID)
#1
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Vestal, NY
Posts: 2,072
A New way to do DIY Tuts. Interior Light DIY (NEW VID)
EDIT NEW VIDS ( 5/1/2010
NEW VID
http://www.youtube.com/watch?v=VBPJKZPxQIw
HEy whats sup. this is the world famous DJ FroZone checkin in here. The below is a Video/Pic tutorial of how to change all the int. bulbs inteh 08 xb. with help from Jimbomb and whipsaz i was able to do it all and tape it. So leave feedback i did most of the teaching on the follwing video (that i know sucks cause im impatient and don't know how to edit. It looks great and if u ahve any questions PM me.
BTW i don't know how to embed so please tell me
part1
http://www.youtube.com/watch?v=2v1IVJR7Bjc
Part2
http://www.youtube.com/watch?v=vOoagI20ChU
Part 3
http://www.youtube.com/watch?v=9iUmzstAdKI
Part 4
http://www.youtube.com/watch?v=fF0dbgrQKB4
Part 5
http://www.youtube.com/watch?v=Veiii896UoA
And here are the pics
That is the map light housing. the brown prongs are what ur aiming for
Trunk Light location
Dome Light
DONE
Also this is how u get to the plate lights
that is the slot im talking about.
So in short. BECAREFUL WITH THE WIRES. make sure metal isn't touching anywhere.
also in the dome light if u pull it out there is a metal covering the hole where teh festoon bulb is. i took that off just by pressing on it. If u blow a fuse don't worry! they can be replaced and aren't hard to find. they are the MINI atc fuses. also ur manual shows what each fuse is used for.
194 bulb
http://superbrightleds.com/mini-wedge.html i used x6 bulb for map and plate
30mm Festoon
I used 9Led base festoon.
U could use others for the dome if u want.
for the light board i used 4 superflux leds fro m
http://lsdiodes.com/leds/viewtopic.php?t=23
they closed but hey FREE Leds
So thats my tutorial i hope u guys like it and if u can tell me how to embed so i don't have to link out.
GOOD LUCK AND PM ME!
DJ FROZONE
So new cuts
Dome lights
http://www.youtube.com/watch?v=D-Z1MByfBU8
Ozinum Bar wiring
http://www.youtube.com/watch?v=Ual8i65qT-w
part 2
http://www.youtube.com/watch?v=zPbITqn0nnA
Mirror talk
http://www.youtube.com/watch?v=IoqB0kO_da8
FRONT LEDS (note this video is older i have found out the size bar underneath and it is sick.
http://www.youtube.com/watch?v=lWywWPkylJw
SONIC AMBUSH up north where i live we have no sonics sooo this is the first one ever.
http://www.youtube.com/watch?v=Q6ql205KYps
IF you know how to embed help?
Btw more goodies (more scion and beatboxing dopenss)
http://www.youtube.com/watch?v=j_49fje5xjA
NEW VID
http://www.youtube.com/watch?v=VBPJKZPxQIw
HEy whats sup. this is the world famous DJ FroZone checkin in here. The below is a Video/Pic tutorial of how to change all the int. bulbs inteh 08 xb. with help from Jimbomb and whipsaz i was able to do it all and tape it. So leave feedback i did most of the teaching on the follwing video (that i know sucks cause im impatient and don't know how to edit. It looks great and if u ahve any questions PM me.
BTW i don't know how to embed so please tell me
part1
http://www.youtube.com/watch?v=2v1IVJR7Bjc
Part2
http://www.youtube.com/watch?v=vOoagI20ChU
Part 3
http://www.youtube.com/watch?v=9iUmzstAdKI
Part 4
http://www.youtube.com/watch?v=fF0dbgrQKB4
Part 5
http://www.youtube.com/watch?v=Veiii896UoA
And here are the pics
That is the map light housing. the brown prongs are what ur aiming for
Trunk Light location
Dome Light
DONE
Also this is how u get to the plate lights
that is the slot im talking about.
So in short. BECAREFUL WITH THE WIRES. make sure metal isn't touching anywhere.
also in the dome light if u pull it out there is a metal covering the hole where teh festoon bulb is. i took that off just by pressing on it. If u blow a fuse don't worry! they can be replaced and aren't hard to find. they are the MINI atc fuses. also ur manual shows what each fuse is used for.
194 bulb
http://superbrightleds.com/mini-wedge.html i used x6 bulb for map and plate
30mm Festoon
I used 9Led base festoon.
U could use others for the dome if u want.
for the light board i used 4 superflux leds fro m
http://lsdiodes.com/leds/viewtopic.php?t=23
they closed but hey FREE Leds
So thats my tutorial i hope u guys like it and if u can tell me how to embed so i don't have to link out.
GOOD LUCK AND PM ME!
DJ FROZONE
So new cuts
Dome lights
http://www.youtube.com/watch?v=D-Z1MByfBU8
Ozinum Bar wiring
http://www.youtube.com/watch?v=Ual8i65qT-w
part 2
http://www.youtube.com/watch?v=zPbITqn0nnA
Mirror talk
http://www.youtube.com/watch?v=IoqB0kO_da8
FRONT LEDS (note this video is older i have found out the size bar underneath and it is sick.
http://www.youtube.com/watch?v=lWywWPkylJw
SONIC AMBUSH up north where i live we have no sonics sooo this is the first one ever.
http://www.youtube.com/watch?v=Q6ql205KYps
IF you know how to embed help?
Btw more goodies (more scion and beatboxing dopenss)
http://www.youtube.com/watch?v=j_49fje5xjA
Last edited by DJ_FroZone; 05-02-2010 at 03:56 AM. Reason: cause im dope.
#2
Sweet tutorial, this will make it very easy.
Can somebody in authority please add this to the tech section.
Thanks for putting in all the effort to get this on the forum DJ FroZone (now I know where the FroZone comes from).
And thanks jimmbomb for your info and support that helped make this possible.
Can somebody in authority please add this to the tech section.
Thanks for putting in all the effort to get this on the forum DJ FroZone (now I know where the FroZone comes from).
And thanks jimmbomb for your info and support that helped make this possible.
#3
You crack me up, D J!!! Excellext color commentary too!! I especially like where you realized that your dog ran off too!!!! Hah Hah Hah Ha Looks Good, DJ!!!! good job.. it was fun helping ya with what I could. keep up the good posts!!!! jh
The 'BUTTERKNIFE MODS'
The 'BUTTERKNIFE MODS'
#4
damn someone buy the boy a drop light and a space heater for his garage. that way when he makes more video he won't be cold and have good lighting
what is the part code for the scion butterknife tool???
very good job on the video. 5 part is easier to follow then one big one.
what is the part code for the scion butterknife tool???
very good job on the video. 5 part is easier to follow then one big one.
#11
"194 bulb
http://superbrightleds.com/mini-wedge.html i used x6 bulb for map and plate
31mm Festoon
I used 9Led base festoon. "
I think you meant 30 mm because they don't have a 31mm that i could find, tell me if I am wrong on this...
http://superbrightleds.com/mini-wedge.html i used x6 bulb for map and plate
31mm Festoon
I used 9Led base festoon. "
I think you meant 30 mm because they don't have a 31mm that i could find, tell me if I am wrong on this...
#13
thanks alot, i loved the videos. i was just out trying to pack the back of my XB and that little stock light on the left is weak; i couldn't see anything. so i got that one and it was about 10.00 after shipping. thanks again
#14
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Vestal, NY
Posts: 2,072
Originally Posted by longboardluv
thanks alot, i loved the videos. i was just out trying to pack the back of my XB and that little stock light on the left is weak; i couldn't see anything. so i got that one and it was about 10.00 after shipping. thanks again
#20
ok thanks, well i finished replacing all my interior lights with LEDs, thanks to your DIY videos.
somewhere i saw someone talked about using this 16 panel led to replace the dome light. you can order it through ozinum. this is the one i used...
http://www.oznium.com/led-domelight
they make it real easy because they send an adapter for every variety of bulb. and the wires run out of their little fake bulb to the led panel. the 16 is the only one that will fit. you have been a big help. i might have to take pictures of them.
somewhere i saw someone talked about using this 16 panel led to replace the dome light. you can order it through ozinum. this is the one i used...
http://www.oznium.com/led-domelight
they make it real easy because they send an adapter for every variety of bulb. and the wires run out of their little fake bulb to the led panel. the 16 is the only one that will fit. you have been a big help. i might have to take pictures of them.