She’s one hot box, and a dirty box (My SW 08 Xb)
Thread Starter
Senior Member
SL Member
Joined: Nov 2007
Posts: 209
From: WA
She’s one hot box, and a dirty box (My SW 08 Xb)
I have been here since about 2 weeks before I got my Super White 08 Xb, which was 11/25/2007. Just now decide to post some pics. These are from a few days ago in the snow and she’s really dirty. I will post some better ones when the weather gets better here in Washington and as I progress with my modding. Your thoughts and comments are appreciated.
Specs/Modifications:
Super White 08 Xb
5-Speed
Moonroof (An option that I had to have but paid way to much for)
Carbon Fiber Window Trim
Front Windows Tinted to 30%
TRD Carbon Fiber Engine Cover
TRD Strut Tower Bar
TRD Rear Sway Bar
Scion Floor Mats
Scion Illuminated Door Sills
4 n 1 Interior LED Illumination kit
9005 SilverStar Bulbs - High Beam Bulbs
Rear Spoiler
Gloss Black Hubcaps
Needs to be Installed or in the Mail:
TRD CAI
TRD Springs –
TRD Shocks ¬ –
(May not do these shocks and springs. I may go with the Ksport coilover, but I really want Tein. Putting them on in the spring after winter. I have to considered my driveway because it goes up from the road and don’t want to scrap)
Mobile HID 4300K
Sparco Pedals
Rumion JDM Blue Tint Rain Mirrors
LED Turn Signals
LED Dome Light
Map Lights, Cargo Bay Light, License Plat Lights
Need/Wish/Soon List:
19” Wheels
Foglights with HID
Headunit with Nav
Speakers and Sub in spare location
Leather with heated seats
LEDs to light the rear floor and cargo areas
Front Lip or 5 axis kit
TRD Quickshift and **** (when released)
Rumion JDM Taillights
Rumion JDM Rear Bumper
Rumion JDM Mud Flaps
Headers
Exhaust
ECU Chip
More Power
Specs/Modifications:
Super White 08 Xb
5-Speed
Moonroof (An option that I had to have but paid way to much for)
Carbon Fiber Window Trim
Front Windows Tinted to 30%
TRD Carbon Fiber Engine Cover
TRD Strut Tower Bar
TRD Rear Sway Bar
Scion Floor Mats
Scion Illuminated Door Sills
4 n 1 Interior LED Illumination kit
9005 SilverStar Bulbs - High Beam Bulbs
Rear Spoiler
Gloss Black Hubcaps
Needs to be Installed or in the Mail:
TRD CAI
TRD Springs –
TRD Shocks ¬ –
(May not do these shocks and springs. I may go with the Ksport coilover, but I really want Tein. Putting them on in the spring after winter. I have to considered my driveway because it goes up from the road and don’t want to scrap)
Mobile HID 4300K
Sparco Pedals
Rumion JDM Blue Tint Rain Mirrors
LED Turn Signals
LED Dome Light
Map Lights, Cargo Bay Light, License Plat Lights
Need/Wish/Soon List:
19” Wheels
Foglights with HID
Headunit with Nav
Speakers and Sub in spare location
Leather with heated seats
LEDs to light the rear floor and cargo areas
Front Lip or 5 axis kit
TRD Quickshift and **** (when released)
Rumion JDM Taillights
Rumion JDM Rear Bumper
Rumion JDM Mud Flaps
Headers
Exhaust
ECU Chip
More Power
Thread Starter
Senior Member
SL Member
Joined: Nov 2007
Posts: 209
From: WA
aman – I made the hub caps (and you can too) as a fill in until I get wheels in the spring. Here is how, really freakin easy:
Materials:
2 Cans of Semi Gloss Black Plastic Spray Paint (I used Valspar plastic paint)
1 can of primer
400 or 500 grit sandpaper
Dishwashing soap
Cotton Towels
Tack Cloth
I removed the hub caps. The emblems pop right off, because they are just clicked in with a tooth. Washed the hub caps in my kitchen sink with Dishwashing soap that said “tough on grease”. Made sure to clean every corner and surface. Dried with the Cotton towels. Sanded with the sandpaper. Just ruffed up every face on the surface. You can see it get hazy and feel smooth, Rinsed. Dried again with towels. Wiped with tack cloth. Set on boards on top to sawhorses and sprayed a light coat of the primer. Then spray many light coats with the black. Just started at one wheel and went down the line until it had a nice thick even coat. Dried in 24hrs. I did this the Friday before Christmas, beer in hand and it took me about 2hrs and I went slow.
Materials:
2 Cans of Semi Gloss Black Plastic Spray Paint (I used Valspar plastic paint)
1 can of primer
400 or 500 grit sandpaper
Dishwashing soap
Cotton Towels
Tack Cloth
I removed the hub caps. The emblems pop right off, because they are just clicked in with a tooth. Washed the hub caps in my kitchen sink with Dishwashing soap that said “tough on grease”. Made sure to clean every corner and surface. Dried with the Cotton towels. Sanded with the sandpaper. Just ruffed up every face on the surface. You can see it get hazy and feel smooth, Rinsed. Dried again with towels. Wiped with tack cloth. Set on boards on top to sawhorses and sprayed a light coat of the primer. Then spray many light coats with the black. Just started at one wheel and went down the line until it had a nice thick even coat. Dried in 24hrs. I did this the Friday before Christmas, beer in hand and it took me about 2hrs and I went slow.
Senior Member
SL Member
Joined: Dec 2004
Posts: 733
From: Packerland
Very nice so far.
It sounds like you have a lot of work ahead of you. It's fun work though.
I too did the black hub caps thing when I was running my stock wheels. Thought I had a picture of it like that but I cannot find one. :?
It sounds like you have a lot of work ahead of you. It's fun work though.
I too did the black hub caps thing when I was running my stock wheels. Thought I had a picture of it like that but I cannot find one. :?
Senior Member
SL Member
Joined: Nov 2007
Posts: 852
From: Marysville, CA
i live close to the thrift way. the meet and greet is the fourth friday of the month. also rodland is doing a meet and greet comming up about the middle of the month as well. i will keep you posted. or also check this forums it is the scionlife regional forum for the pacific northwest.
https://www.scionlife.com/forums/viewforum.php?f=40
this is where all the events are listed. like the january 12th gocart meet and greet
https://www.scionlife.com/forums/viewforum.php?f=40
this is where all the events are listed. like the january 12th gocart meet and greet
Thread Starter
Senior Member
SL Member
Joined: Nov 2007
Posts: 209
From: WA
moonroof was $1900 and the dealer (stealer) drove the car to a local company who cut it out and redid the headliner. You can get one done by an after market company for like $1200, BUT I wanted the dealer to warranty that item.