19" wheels won't change the fact that the edge of the fenders would be closer to the wheel lips in the rear.

 

the thing is the front lip already hangs low enough to whereas i scrape in certain driveways. i can't even begin to think of lowering the front. i believe this XB is running the Eibach Pros which give 1.0/1.2in drop and it fills out nicely with the wheels.

 

I didn't think we were talking about filling out the wheel wells, I thought we were talking about the fact that you're asking about dropping the rear 2" more than the front, as compared to the stock springs which only jack up the rear 1-1/2" more than the front. Imagine dropping the xB above another 3/4" in the rear, and raising the front back up the 1" they are dropped (if they are in fact Pro-Kit springs).

 

So I guess the better question is, does anyone have pics of an xb with the 5axis lip kit on NF springs?

 

D_Unit has the 5 Axis lip kit, and was on DF's, but swapped out to NF's because of scraping. I sent him a PM, so hopefully you will have pics here soon.

 

sic! thank you

 

just for point of reference. this xb is on the DFs

 

By friday i hope to have pic's of Toaster4u's New RS 6 with Five axis Kit , 5Axis Wheels and NF-210 Lowering springs. If you can wait till than i will def have pic's or Toaster4u should def have them up.




Also if you check out this post on the NF-210's there is an xB with five axis kit and NF-210's.


Hope this helps.


https://www.scionlife.com/forums/vie...asc&&start=240