Question regarding lowing... can anyone help?
I just had 20's installed on my xB.... Now when I drive I it almost feels like i'm driving a LARGE car. I feel real high off the ground. Does anyone know if I can lower it keeping the 20's and if so what brand of springs would work best? And how much to lower it.....
Your overall wheel/tire diameter is only about 1/2" larger than stock, which means your seat sits 1/4" higher.
That being said, I recommend everybody get rid of the stock springs. Personally I recommend the Tanabe NF210's. If you check out this thread, you will see why:
https://www.scionlife.com/forums/viewtopic.php?t=206857
The drop is 1" front and 1.7" rear. These springs would be especially good with 20's due to the improvement in ride quality that they offer. Here are some pictures of NF210's with 20x8.5 +40 wheels , with tires that are just a little bit taller than yours.
https://www.scionlife.com/forums/vie....php?p=3257036
That being said, I recommend everybody get rid of the stock springs. Personally I recommend the Tanabe NF210's. If you check out this thread, you will see why:
https://www.scionlife.com/forums/viewtopic.php?t=206857
The drop is 1" front and 1.7" rear. These springs would be especially good with 20's due to the improvement in ride quality that they offer. Here are some pictures of NF210's with 20x8.5 +40 wheels , with tires that are just a little bit taller than yours.
https://www.scionlife.com/forums/vie....php?p=3257036
Thread
Thread Starter
Forum
Replies
Last Post
bootlgr
Scion xA/xB 1st-Gen ICE & Interior
1
Jan 26, 2016 01:22 AM





