The OFFICIAL 18" Wheel Thread.... Let's see them
#1204
Everyone / Anyone, I have rims on my xB and here are the specs: 18x8 with 225/40/18 tires and +45.
My question is, If I want to get the rear more flush with the front how big of a spacer would I have to run?
I'm on df210s I prefer not to pull / roll.
My question is, If I want to get the rear more flush with the front how big of a spacer would I have to run?
I'm on df210s I prefer not to pull / roll.
#1205
There's a post by Scionide on the site, where he shows his rear wheels being 18x8 +30mm and they were about a quarter inch from being flush. I think its in this thread towards the first half as a matter of fact. With that being said, I've seen wheels that are that spec with a 15mm spacer, and they look really good. Pretty positive no work to fenders would have to be done. What kind of wheels are they?
#1208
If you want to stay near stock diameter then either 225/40s or 215/40s will work well. The 215s will have a noticeable stretch while the 225s, while still stretched won't be as noticeable. Both will clear your fenders with no issue.
#1209
no forget you need the flat lug nuts and not the acron cause the acron will come loose after drving for 1/2 hr
#1210
Ok, I curb checked my rims more that I like recently. That being said I'm going to be getting new ones. The rims I'm looking at are 18x8.5 +30 all around. Would these work on DF210s? I've tried searching to find pictures of this setup bug haven't had much luck.
#1211
#1215
I'm looking at some rims with the following specs, would these fit:
Front: 18" x 8.5" +30
Rear: 18" x 10" +25
or 18" x 8.5" +30 all around
I'm on DF210s I would like to know if these would fit and how much fender work would be needed
Front: 18" x 8.5" +30
Rear: 18" x 10" +25
or 18" x 8.5" +30 all around
I'm on DF210s I would like to know if these would fit and how much fender work would be needed
Last edited by bnutz313; 05-09-2014 at 02:22 PM.
#1216
Hey guys new to the site. I bought my wife a 2011 8.0rs and need some help with wheel, spring, tire combo info. The wheels i want are 18x8 with a +42 offset and i will be installing NF210 springs. this is the family ride so i would like to keep the ride as smooth as possible, what is the tallest tire i can run with out any fender mods. I was thinking 225/45/18. but i would like others input that have more experience than i do
Last edited by Getfuzzy; 05-10-2014 at 04:38 PM.
#1217
Hey guys new to the site. I bought my wife a 2011 8.0rs and need some help with wheel, spring, tire combo info. The wheels i want are 18x8 with a +42 offset and i will be installing NF210 springs. this is the family ride so i would like to keep the ride as smooth as possible, what is the tallest tire i can run with out any fender mods. I was thinking 225/45/18. but i would like others input that have more experience than i do
#1218
Hey guys new to the site. I bought my wife a 2011 8.0rs and need some help with wheel, spring, tire combo info. The wheels i want are 18x8 with a +42 offset and i will be installing NF210 springs. this is the family ride so i would like to keep the ride as smooth as possible, what is the tallest tire i can run with out any fender mods. I was thinking 225/45/18. but i would like others input that have more experience than i do