Post your xD!!
04-10-2013, 01:49 AM
#1681
Member
SL Member
Join Date: Aug 2011
Location: Long Beach, CA
Posts: 52
Ait Body Kit on rs1
Working on a new body kit for my RS1 hope to have it ready for paint by next week. Still struggling to get the rear bumper to line up. here's how it looks so far. Sits really low with the Teins and 18" wheels.
04-14-2013, 10:31 AM
#1683
Junior Member
Join Date: Nov 2012
Posts: 8
Had some time to get my tires mounted/balanced yesterday and get the new wheels onto the car. K-Sport coilovers are ordered and should be here this week hopefully.
Specs at this point: XXR 527's 17x9.75" +25 (4), 215/45 (4), stock height.
My girlfriend got me some Muteki Neo-chrome lugs for my birthday too! I think shes a keeper.
Specs at this point: XXR 527's 17x9.75" +25 (4), 215/45 (4), stock height.
My girlfriend got me some Muteki Neo-chrome lugs for my birthday too! I think shes a keeper.
04-17-2013, 07:43 AM
#1685
Member
SL Member
Join Date: Aug 2011
Location: Long Beach, CA
Posts: 52
RS1 with AIT kit (new pics)
I took some pics with my cell phone this morning. I got the bumper on, but still need to work on it a little bit more before I get it painted. Also changed my dome to blue LED to match my other LED's.
05-05-2013, 07:00 PM
#1689
Senior Member
SL Member
Join Date: Jan 2012
Location: Denton
Posts: 117
http://www.trdsparks.com/displaypart...&parts_id=2422
05-06-2013, 06:32 AM
#1690
Junior Member
Join Date: Nov 2012
Posts: 8
Looking good Wasabixd89! I like what you did with the wheels. The matched paint looks better than the all black finish that you had before IMO.
Says "$NA" since (I believe) the LED tails are discontinued.
And a few random pics of mine as I'm still waiting for my K-Sports. BeanGarage was supposed to send me my coilovers but they were actually shipped out directly from K-Sport. Then right as I had the car up on jack-stands I figured out that the parts they sent were for an xBII. So BeanGarage contacted the manufacturer about sending me the correct parts and was informed that they were out of stock. So K-Sport literally had to have more made to fill my order. Should be here this week or next I hope...
just found the LED tails on trd sparks. I want to get a set myself, but don't got the money for them
http://www.trdsparks.com/displaypart...&parts_id=2422
http://www.trdsparks.com/displaypart...&parts_id=2422
And a few random pics of mine as I'm still waiting for my K-Sports. BeanGarage was supposed to send me my coilovers but they were actually shipped out directly from K-Sport. Then right as I had the car up on jack-stands I figured out that the parts they sent were for an xBII. So BeanGarage contacted the manufacturer about sending me the correct parts and was informed that they were out of stock. So K-Sport literally had to have more made to fill my order. Should be here this week or next I hope...
05-13-2013, 07:58 PM
#1693
Junior Member
Join Date: Nov 2012
Posts: 8
Coilovers are in!
My KSports came in on saturday, so of course I had to install them the same day! Need an alignment really bad as i have a lot of toe out in the front, and i need to adjust the height on the passenger side since its sitting higher for some reason. -5 degree camber plates will be here wednesday so the rear can go lower, and I might just leave the front alone for now. NOTE: This is without having any fender modification done. The rears need to be pulled still as I'm rubbing on big bumps.
This is the height that i would like to be at, maybe a little lower, but it has to wait until the camber plates are in and some minor (or major...) fender pulling.
This is the height that i would like to be at, maybe a little lower, but it has to wait until the camber plates are in and some minor (or major...) fender pulling.
my urban cruiser
