I'm selling my exhaust. It bolts up to the s-pipe and is 2.25" ID all the way through. Canister is Angled out and painted hi-temp flat black with a raw tip.
South Florida only since the mid-pipe is one LONG piece

Taking offers.




http://www.youtube.com/watch?v=TnMWZkXEtNs

 

ill buy ur wheels

 

lol at the cardboard over the plates.

 

Lol, yea right. I just got em like 3 weeks ago.

 

are those the ever so popular Grids?

 

Sounds great! I'm in the market for springs or an exhaust in about a week..what's your price? Let's just say I'm unfamiliar with prices of custom exhausts! :D

 

Damn, I'm going up to o-town this weekend too. I'm looking for around $225 but VERY open to offers.

 

bump

 

Have more videos of the exhaust? Flybys? Take off? WOT?

 

I could try and get some. I gotta find a place to do it tho.

 

Okay cool..if I happen to miss when you come up to Orlando..which is very likely since I'm waiting on some money from school..then I will come to you. Its a justifiable reason to drive to the Miami area LOL. Now..what is your current setup? Doesn't sound like you have a header. Do you just have that portion of the exhaust and that's it? I just wanna make sure it isn't full of rasp LOL. The $220 range sounds like a good deal for a great sounding exhaust!

 

Also..specs, pics and info on the exhaust? Who made it? From what parts?

 

Yea, i just chopped off the glasspack and welded in some straight pipe since i put the stock header back on (for better flow). It sounded almost exactly the same with the glasspack and aftermarket header except it was deeper. If you do have a header it isnt raspy with the stock midpipe.
If you want, you could tack on another $40 to the price and i'll buy another one and weld it on.

The exhaust started out as me getting scammed. I bought a generic exhaust (might be ebay) from Kizale on here. Go figure, it didn't even come close to fitting. Busted out the sawzall and welder and modified the axleback to fit the stock midpipe with the muffler that was on there. Rocked that for about a month then modified the midpipe to fit. 2 months later, I didn't like how it looked (HUGE muffler) so i bought a new N1 muffler and i forget what kind of glasspack. I originally was going to leave the muffler pointing straight out, but it was too long for that so i modified the piping on the axleback to angle the muffler out. The muffler kept on swaying so i welded on another bracket/hanger to reach to the drivers side hanger.

Now im selling cuz they're "cracking down on street racing" and apparently having an exhaust is street racing down here. Thats also why i painted most of it black and i've been driving around with the silencer in.

Flyby, take off, and wot vids are being edited now. The vid's like 30min long cuz i couldnt find a uturn. lol.

 

Also, just to make it clear, the exhaust was made by me. I used a 100amp flux cored welder. All welds made with flux cored wire are messy since the splatter goes everywhere and stick to anything metal. The welds on the axleback were cleaned up and splatter removed. Aluminized steel was used where the original piping was replaced. Everything from the resonator back was painted with flat black high temp paint except the muffler tip.

 

As requested.

http://www.youtube.com/watch?v=sYNv-YpIEGA

 

take 200 installed? im in 954

 

Which part of broward? im over in coral springs.

pm'd you.

 

im in springs too, can i come buy and check it out in person, i want to here it in person.

any chance you install springs aswell

 

Yea, we can meet up. I'm off from work all weekend.
And yea, I can install springs. I'm selling my H&R sports as well. Just havent posted them up yet.

Let me know if and when u wanna meet up.

 

Bump, very flexible on the price.
Seriously, make an offer.
Looking to change things up.