Trying to visualize an xB w/TRD springs from the side profile. Also need actual measurements from the ground to the wheelweel lip center for the front and rear. Thanks in advance

 

The only pics I can find are too dark to see the distance between the lip and top of the tire. Still need pics and measurements PLEASE!!!!!!!?????

 

I have xA pictures with TRD springs.. I dunno if it'll be the same, but I'll let you decide that.

http://www.pbase.com/itzjere/lowered

 

Thanks for the response, but I'm not sure about which pix are before and after. Also unclear if TRDs drop the 2 of them the same amount. Need before and after measurements to get the amount of actual drop. And the easiest and most accurate spot to check is down the center of the wheel, from the ground to the WW lip. Really just need to know if it is 1 inch of lowering like the info I have gotten.

 

Those are after pics. Before pics can be found everywhere. Just look at any stock xA. When you compare stock and TRD springs next to each other, you'll notice a big difference in height, mostly from the wheel gap. The TRD's are listed at 1" all around, but after settling, they sit lower than 1". More like 1.5"

Hopefully that helps. If you got any more questions, shoot.

 

BEFORE



BEFORE



AFTER



AFTER



Hope that helps. the fronts will settle a bit more with time and it won't have that look as in the last picture.

 

Thanks TJ, thats what I needed for pics but I still need actual measurments from the Wheel well edge to the ground down through the center of the wheel. Trying to set height to match the TRDs