FS: 2008 Scion tC Cams - Fits ALL 2AZFE
Up forsale is a set of 2008 Scion tC camshafts. Only 20K miles on them. Perfect condition. Makes more WHP than 05-06 cams.
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
Edit - Im wrong - I previousely thought the cams were unchanged from 06-07 - they were in fact - heres some supporting documentation
I guess I can be wrong from time to time 
The profile of the intake camshaft has been modified to enhance output by increasing the valve operation
angle and valve lift.
Models ’07 Models ’06 Models
Valve Operation Angle
Open 3 to 43° BTDC 3 to 43° BTDC
Close 65 to 25° ABDC 60 to 20° ABDC
Valve Lift Amount mm (in.) 10.0 (0.39) 9.4 (0.37)
-The diameter of the intake valve springs has been reduced to accommodate increased valve lift, without
changing the seat pressure.
-The exhaust valves are heat-treated to enhance thermal resistance.
I guess I can be wrong from time to time The profile of the intake camshaft has been modified to enhance output by increasing the valve operation
angle and valve lift.
Models ’07 Models ’06 Models
Valve Operation Angle
Open 3 to 43° BTDC 3 to 43° BTDC
Close 65 to 25° ABDC 60 to 20° ABDC
Valve Lift Amount mm (in.) 10.0 (0.39) 9.4 (0.37)
-The diameter of the intake valve springs has been reduced to accommodate increased valve lift, without
changing the seat pressure.
-The exhaust valves are heat-treated to enhance thermal resistance.
Last edited by thendawg; Feb 24, 2010 at 09:56 PM.
Edit - Im wrong - I previousely thought the cams were unchanged from 06-07 - they were in fact - heres some supporting documentation
I guess I can be wrong from time to time 
The profile of the intake camshaft has been modified to enhance output by increasing the valve operation
angle and valve lift.
Models ’07 Models ’06 Models
Valve Operation Angle
Open 3 to 43° BTDC 3 to 43° BTDC
Close 65 to 25° ABDC 60 to 20° ABDC
Valve Lift Amount mm (in.) 10.0 (0.39) 9.4 (0.37)
-The diameter of the intake valve springs has been reduced to accommodate increased valve lift, without
changing the seat pressure.
-The exhaust valves are heat-treated to enhance thermal resistance.
I guess I can be wrong from time to time The profile of the intake camshaft has been modified to enhance output by increasing the valve operation
angle and valve lift.
Models ’07 Models ’06 Models
Valve Operation Angle
Open 3 to 43° BTDC 3 to 43° BTDC
Close 65 to 25° ABDC 60 to 20° ABDC
Valve Lift Amount mm (in.) 10.0 (0.39) 9.4 (0.37)
-The diameter of the intake valve springs has been reduced to accommodate increased valve lift, without
changing the seat pressure.
-The exhaust valves are heat-treated to enhance thermal resistance.
^^^^
What he said - lol
Thread
Thread Starter
Forum
Replies
Last Post
wwotr
Scion xB 2nd-Gen ICE & Interior
6
Mar 28, 2015 01:47 AM







