customizing the blue batmobile overlays.....
i want to buy this overlay from bluebatmobile:
http://i2.photobucket.com/albums/y42...C-xB_tail4.jpg
i was wondering if i could cut the vinyl overlay to make it look like this:
http://i14.photobucket.com/albums/a3...%20Tails/6.jpg
http://i2.photobucket.com/albums/y42...C-xB_tail4.jpg
i was wondering if i could cut the vinyl overlay to make it look like this:
http://i14.photobucket.com/albums/a3...%20Tails/6.jpg
i know they are painted but i am too _____ to paint them myself. i'm afraid i'm gonna screw it up really bad. thats why i was thinking i could just cut the overlay to make it look like that
Cut the overlay. There is no overlay if it is painted. There is nothing to cut except paint? Im confused.
Painting it is not hard at all. Just tape everything good with painters tape that you don't want paint on and spray away.
Painting it is not hard at all. Just tape everything good with painters tape that you don't want paint on and spray away.
just put the whole overlay on, then use an exacto knife to sorta etch it off while its on the tail light. jus do it soft enough not to scratch, but hard enough to get the job done. hope that helps
Originally Posted by TheIcon
Im confused.
Yes, you could cut them. They are just a thin film. If you want the red outline along the sides tho, you'll want to order the full tail one and trim that out. I'd suggest using Glad Press and seal wrap to outline how you want it on the tail, then stick that over the overlay and cut it out. Be careful. Let us know how it turns out.
And I hate painting too...
bbsukidesu
the painted tail is mine from a walkthrough that's in the tech section. if you follow the walkthrough (or Max2k's), it should be easy enough without breaking the damn things.
yeah, i hate painting too, but i like the way paint looks over vinyl for tail redouts
here's the link for the tech article...
https://www.scionlife.com/forums/viewtopic.php?t=67085
the painted tail is mine from a walkthrough that's in the tech section. if you follow the walkthrough (or Max2k's), it should be easy enough without breaking the damn things.
yeah, i hate painting too, but i like the way paint looks over vinyl for tail redouts
here's the link for the tech article...
https://www.scionlife.com/forums/viewtopic.php?t=67085
You could cut the overlay, but it's really easier just to paint it. I tried to install some of those overlays and couldn't swing it, but the painting is actually really easy if you do it from the inside and take your time.
Thread
Thread Starter
Forum
Replies
Last Post
mischman
PPC: Exterior / Styling
2
Sep 15, 2015 03:38 PM
pjl52
Scion xA/xB 1st-Gen ICE & Interior
2
Aug 13, 2015 02:38 PM
umnitza
Exclusive Sponsored Sales
1
Jul 25, 2015 07:54 PM







.
