06' PW XB WHEEL OFFSET ICW JETS
I'm getting an '06 Polar White It's on order now. I"m looking at these ICW 25B Jet Wheels. They are 17x7 with 38mm offset will they be close to flush witht he front fenders and in the back I will be running the OTG 10mm spacers. What do ya'll think about the offset will it be ok?? I think 42 or 45 might be too much. Thanks for all ya'lls input.
*edited for case by stick_1NZ
*edited for case by stick_1NZ
I'd go with the lower of the two. You'll be far from "flush," but the 10mm rear spacers will help.
I'm running a +20 in the back (thanks to my 15mm rear spacers) and this is how it looks:


Rears are just about flush with the fenders; the fronts could use a 5mm spacer, imho, but I'm probably going to just leave it the way it is.
I'm running a +20 in the back (thanks to my 15mm rear spacers) and this is how it looks:


Rears are just about flush with the fenders; the fronts could use a 5mm spacer, imho, but I'm probably going to just leave it the way it is.
Thread
Thread Starter
Forum
Replies
Last Post
gettoastedinthetoaster
Scion xB 2nd-Gen Wheel & Tire
4
Dec 29, 2014 11:39 PM







