Introducing ICHIBA USA Aluminum Wheel Spacer
Thread Starter
Junior Member
Joined: May 2006
Posts: 21
From: city of industry
Introducing ICHIBA USA Aluminum Wheel Spacer
We just got the new shipment in last month and we would like to introduce that to all TC, XB & XA owners.
To participate in the group buy, see the thread in our subforum here.
Click Here To Link
Also click the link here and reach our authorized dealers
Thank You!
To participate in the group buy, see the thread in our subforum here.
Click Here To Link
Also click the link here and reach our authorized dealers
Thank You!
Thread Starter
Junior Member
Joined: May 2006
Posts: 21
From: city of industry
How To Measure?
The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
5MM = 0.197 INCH
8MM = 0.313 INCH
10MM = 0.393 INCH
12MM = 0.473 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
5MM = 0.197 INCH
8MM = 0.313 INCH
10MM = 0.393 INCH
12MM = 0.473 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
Thread Starter
Junior Member
Joined: May 2006
Posts: 21
From: city of industry
Thread
Thread Starter
Forum
Replies
Last Post
